Product Description

KXT coupling,

one. The coupling is composed of two hubs: One particular pin hub with the corresponding pins and a bush hub.

two. The torque is transmitted by means of the steel pins with their taper elastomer rings and the corresponding bores

   in the bush hub.

3. They can be assembled with taper bush.

4. The couping is servicing-totally free an is employed in general CZPT and the pump industry.

five. CZPT ized requirement is CZPT .

ZheJiang CZPT Transmission CZPT ry Co., Ltd is specialized in manufacturing and promoting transmission products.

Our items are exported to the world CZPT equipment organization in CZPT pe, CZPT ica, South Africa, Australia, CZPT Asia and so forth.

Our main products include: CZPT pean pulley, CZPT ican pulley, CZPT s, taper bushing, QD bush, lock component, adjustable motor base, motor rail, sprockets, chain, bolt on hubs, weld on hubs, jaw crusher gear & spare elements and all kinds of CZPT -standardcasting merchandise and so on.
.

one. Clear the shaft, the internal and outer holes of the bushing, and the inner gap of the hub. Get rid of any oil, paint or filth, spot the bushing on the hub, and match the half holes to make entire holes (every single entire hole will only be threaded on a single aspect). Flippantly oil the threads and points of set screws or the threads and heads of cap screws. Loosely area the screws in the threaded holes on the hub side. Make certain the bushing is free on the hub. Snap the assembly onto the shaft and place it in the preferred situation. Tighten the screws alternately and evenly until all are restricted 5. Hammer the massive conclude of the bushing with a hammer and block or socket to stay away from harm. The screw can now be turned slightly to the specified torque placing. Repeat this alternating hammering and screw retightening till the specified torque is reached. Fill all holes with grease to get rid of filth.