China Standard Tianjin Factry Steel 1215 Taper Bush wholesaler

Product Description

Product Description

Product name

Taper lock bushing

Material

Steel, Cast iron, Stainless steel

Color

Black, Natural

Application

Accopanying sprocket, V-type pulley, Timing pulley, Gear ect

Inspection

100%

>> INSTALL
1) Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer of dirt. Place bush in hub and match half holes to make comelete holes(each comeplete hole will be threaded on 1 side only).
2) Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.
3) Make sure bush is free in hub. Slip assembly CHINAMFG shaft and locate in the desired position.
4) Tighten screws alternately and evenly until all are pulled up tightly(See table for torque settings)).
5) Hammer agsinst large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. Repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.

>>REMOVE
1) Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.
2) Insert screws into removel holes that are threaded on the bush side. In sizes where washers are found under screws heads, be sure to use these washers.
3) Tighten screws alternately until bush is loosened in hub and then remove the coplete assembly. If bush does not loosen immediately tap on hub.
 

Packaging & Shipping

Company Profile

 

ZheJiang Haorongshengye Electrical Equipment Co., Ltd.

1. Was founded in 2008
2. Our Principle:

“Credibility Supremacy, and Customer First”
3. Our Promise:

“High quality products, and Excellent Service”
4. Our Value:

“Being Honesty, Doing the Best, and Long-lasting Development”
5. Our Aim:

“Develop to be a leader in the power transmission parts industry in the world”
 

6.Our services:

1).Competitive price

2).High quality products

3).OEM service or can customized according to your drawings

4).Reply your inquiry in 24 hours

5).Professional technical team 24 hours online service

6).Provide sample service

Main products

Machines

 

Exbihition

 

 

Certification: ISO
Pulley Sizes: SPA/Spb/Spc/Spz
Manufacturing Process: Casting
Material: Carbon Steel
Surface Treatment: Polishing
Application: Chemical Industry, Grain Transport, Mining Transport, Power Plant
Samples:
US$ 100/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

taper bush

Where can I find cost-effective taper bushes for agricultural machinery?

When searching for cost-effective taper bushes for agricultural machinery, there are several places where you can explore and find suitable options. Here are some suggestions:

1. Online Industrial Suppliers: Many online industrial suppliers or distributors specialize in providing a wide range of mechanical components, including taper bushes. These suppliers often offer competitive pricing and a variety of taper bush options suitable for agricultural machinery. You can search for reputable online industrial suppliers and browse their catalogs to find cost-effective taper bushes that meet your specific requirements.

2. Agricultural Machinery Dealerships: Local agricultural machinery dealerships or retailers may carry taper bushes or have connections with suppliers who offer such components. Visiting or contacting these dealerships and inquiring about cost-effective taper bushes for agricultural machinery can be a good option. They may have knowledge of affordable options or be able to provide you with contact information for suppliers who specialize in agricultural machinery components.

3. Trade Shows and Exhibitions: Attending trade shows and exhibitions related to agricultural machinery can be an excellent way to explore different suppliers and manufacturers in the industry. These events often feature a wide range of exhibitors showcasing their products, including mechanical components like taper bushes. Engaging with suppliers at these events can help you find cost-effective options and establish direct contacts with manufacturers or distributors.

4. Online Marketplaces: Online marketplaces, such as Amazon, eBay, or specialized industrial marketplaces, can offer a wide selection of taper bushes for agricultural machinery. These platforms allow you to compare prices, read customer reviews, and choose from various sellers, which can help you find cost-effective options. However, it is important to ensure that the sellers on these platforms are reputable and that the taper bushes they offer meet the required quality standards.

5. Local Machine Shops and Fabricators: Local machine shops and fabricators may be able to manufacture custom taper bushes at competitive prices. They can work with you to understand your specific requirements and produce taper bushes tailored to your agricultural machinery. Engaging with local machine shops or fabricators can provide flexibility and cost-effective solutions, especially for unique or specialized applications.

When searching for cost-effective taper bushes, it is essential to consider factors beyond just the price, such as the quality, durability, and compatibility with your agricultural machinery. Ensure that the taper bushes meet the required specifications and standards for your specific application to avoid potential performance issues or premature failures.

By exploring these avenues and considering factors such as price, quality, and compatibility, you can find cost-effective taper bushes for your agricultural machinery that meet your requirements and budget.

taper bush

Can I get advice on selecting taper bushes for specific torque and speed requirements?

Yes, you can seek advice on selecting taper bushes for specific torque and speed requirements. When it comes to choosing taper bushes for a particular application, considering the torque and speed requirements is crucial to ensure the proper functioning and longevity of the power transmission system. Here are some sources where you can obtain advice on selecting taper bushes for specific torque and speed requirements:

  • Manufacturer or Supplier Technical Support: Taper bush manufacturers or suppliers often provide technical support services to assist customers in selecting the appropriate taper bushes for their specific requirements. They have knowledgeable staff who can offer guidance based on the torque and speed parameters of your application. Contacting the manufacturer or supplier directly and discussing your torque and speed requirements will allow them to recommend the most suitable taper bush options for your application.
  • Engineering Consultants or Specialists: Engaging with engineering consultants or specialists who have expertise in mechanical power transmission systems can provide valuable advice on taper bush selection. These professionals can analyze your torque and speed requirements, taking into account factors such as load characteristics, operating conditions, and safety factors. They can then recommend taper bushes that meet the specific demands of your application, ensuring optimal performance and reliability.
  • Online Engineering Communities: There are online communities and forums where engineers, mechanical experts, and industry professionals gather to exchange knowledge and offer advice. Participating in these communities and posting specific questions regarding taper bush selection for torque and speed requirements can lead to valuable insights and recommendations from experienced individuals in the field. These platforms facilitate discussions and allow for collaboration among professionals with diverse backgrounds and expertise.
  • Technical Publications and Resources: Industry publications, technical handbooks, and textbooks related to mechanical engineering and power transmission often cover topics on taper bush selection. These resources provide information on torque and speed considerations and offer guidelines for choosing the appropriate taper bushes. Consulting reputable publications authored by experts in the field can provide detailed advice and insights into the selection process.

When seeking advice on selecting taper bushes for specific torque and speed requirements, it is important to provide accurate and detailed information about your application, including the torque levels, rotational speeds, and any other relevant factors that may impact the performance of the taper bushes. This will enable the experts to make informed recommendations tailored to your specific needs.

By leveraging these sources of advice, you can ensure that you select the most appropriate taper bushes that can effectively handle the torque and speed requirements of your application, promoting efficient power transmission and minimizing the risk of premature failures or other operational issues.

taper bush

What are the advantages of using taper bushes in power transmission systems?

Taper bushes offer several advantages when used in power transmission systems. These advantages contribute to the efficiency, reliability, and ease of maintenance in power transmission applications. Here are some key advantages of using taper bushes:

  • Easy Installation: Taper bushes are designed to simplify the installation process. They have a tapered bore that allows for easy and precise fitting onto the shaft. By using a simple tightening method, such as tightening a set screw or using a locking device, the taper bush securely locks onto the shaft, providing a reliable connection. The ease of installation reduces downtime and labor costs during equipment assembly or maintenance.
  • Secure Shaft Connection: Taper bushes provide a secure and rigid connection between the shaft and the mating component. The taper angle of the bush ensures a tight fit, minimizing any axial movement or slippage between the shaft and the component. This secure connection enhances power transmission efficiency and prevents power loss or misalignment issues, which can lead to equipment damage or decreased performance.
  • Flexibility and Interchangeability: Taper bushes offer flexibility in power transmission systems. They are available in various sizes, allowing for compatibility with different shaft diameters. This interchangeability enables easier component replacement, as taper bushes can be easily swapped out for different sizes without the need for significant modifications. It also simplifies inventory management, as a range of taper bushes can cover multiple shaft size requirements.
  • Reduced Downtime and Maintenance: The design of taper bushes facilitates quick and easy removal and replacement of components during equipment maintenance or repair. With the use of split taper bushes or quick-detachable (QD) taper bushes, the process of disassembling and reassembling power transmission systems becomes faster and more efficient. This reduces downtime, allowing for expedited maintenance procedures and minimizing production or operational disruptions.
  • Cost-Effectiveness: Taper bushes offer a cost-effective solution for power transmission applications. They are generally more affordable compared to alternative methods of shaft connection, such as keyways or splines. Additionally, taper bushes eliminate the need for complex machining processes on the shaft, reducing manufacturing costs and lead times. Their ease of installation and maintenance also contribute to overall cost savings in terms of labor and downtime.
  • Vibration Damping and Misalignment Compensation: Taper bushes provide some level of vibration damping and compensation for minor shaft misalignments. The taper angle and the clamping action of the bush help absorb and distribute vibrations, reducing stress on the shaft and other components. This feature is beneficial in power transmission systems where vibration or misalignment issues can negatively impact equipment performance, reliability, and service life.

Overall, the advantages of using taper bushes in power transmission systems include easy installation, secure shaft connection, flexibility, reduced downtime, cost-effectiveness, and vibration damping capabilities. These advantages make taper bushes a popular choice for connecting rotating shafts to various components, such as pulleys, sprockets, gears, and couplings, in a wide range of industrial applications.

China Standard Tianjin Factry Steel 1215 Taper Bush   wholesaler China Standard Tianjin Factry Steel 1215 Taper Bush   wholesaler
editor by CX 2023-12-06