Tag Archives: china pulleys

China manufacturer Factory Price Cast Iron Taper Lock Bush Be Used with Couplings, Sprockets, and Power Transmission Elements Like V Pulleys& Timing Pulleys bushing design

Product Description

Taper Lock Bushing 3571 for v belt pulley and timing pulley

Product Description
Unlike typical Bearing Bushes, Taperlock Bushes make use of locking mechanisms that have several useful applications, especially in the case of mechanical applications that involve high speeds. These Bearing Bushes are usually used to secure Pulleys, Sprockets and other elements to shafts. Most Taperlock Bushes are manufactured using strong, yet inexpensive materials like cast iron. However, if you require corrosion resistance, steel and stainless steel equivalents are also available CHINAMFG request. Aside from high-speed applications, Taperlock Bushes are also recommended to be used with Couplings, Sprockets, and Power Transmission elements like V Pulleys. Check out our product range for your all your mechanical and construction needs with products like Adhesives & Lubricants, Ball Bearings, V Belts, and Sprockets,. Visit our products page for Special Offers or contact us with any further enquiries. 
Can’t find what you’re looking for? – Contact us.  

Dimensions

1. Product name: Taper bushing

2. Teeth: Depends on the requirement

3. Material: Cast iron stainless steel,

4 Weight: Depends on the product

5. Type: taper bush

Bushing Series

1008, 1108, 1210, 1215, 1310, 1610, 1615,

2012, 2017, 2517, 2525,

3571, 3030, 3525, 3535,

4030, 4040, 4535, 4545,

5040, 5050,

6050,

7060,

8065

For Belt Pulley Section SPA, SPB, SPC, SPZ

6. Bore: keyway bore

Taper Bush specification Taper Bush inner bore specification
1008   10. 11. 12. 14. 15. 16. 18. 19. 20. 22. 24. 25.
1108   10. 11. 12. 14. 15. 16. 18. 19. 20. 22. 24. 25. 28.
1210 1212 11. 12. 14. 15. 16. 18. 19. 20. 22. 24. 25. 28. 30. 32.
1310   14. 15. 16. 18. 19. 20. 22. 24. 25. 28. 30. 32. 35.
1610 1615 14. 15. 16. 18. 19. 20. 22. 24. 25. 28. 30. 32. 35. 38. 40. 42.
2012 2017 18. 19. 20. 22. 24. 25. 28. 30. 32. 35. 38. 40. 42. 45. 48. 50.
2517 2525 20. 22. 24. 25. 28. 30. 32. 35. 38. 40. 42. 45. 48. 50. 55. 60.
3571 3030 25. 28. 30. 32. 35. 38. 40. 42. 45. 48. 50. 55. 60. 65. 70. 75.
3525 3535 35. 38. 40. 42. 45. 48. 50. 55. 60. 65. 70. 75. 80. 85. 90.
4030 4040 40. 42. 45. 48. 50. 55. 60. 65. 70. 75. 80. 85. 90. 95. 100.
4535 4545 55. 60. 65. 70. 75. 80. 85. 90. 95. 100.105. 110.
5040 5050 60. 65. 70. 75. 80. 85. 90. 95. 100 . 105. 110. 115 . 120. 125.

PACKING

Packaging
                      
    Packing  

 

We use standard export wooden case, carton and pallet, but we can also pack it as per your special requirements.

OUR COMPANY

ZheJiang Mighty Machinery Co., Ltd. specializes in offering best service and the most competitive price for our customer.

After over 10 years’ hard work, MIGHTY’s business has grown rapidly and become an important partner for oversea clients in the industrial field and become a holding company for 3 manufacturing factories.

MIGHTY’s products have obtained reputation of domestic and oversea customers with taking advantage of technology, management, quality and very competitive price.

 

Your satisfaction is the biggest motivation for our work, choose us to get high quality products and best service.

OUR FACTORY

Main Products:

Timing belt pulleys, timing bars, timing belt clamping plates.

Locking elements and shrink discs: could be alternative for Ringfeder, Sati, Chiaravalli, BEA, KBK, Tollok, etc.

V belt pulleys and taper lock bush.

Sprockets, idler, and plate wheels.

Gears and racks: spur gear, helical gear, bevel gear, worm gear, gear rack.

Shaft couplings: miniature coupling, curved tooth coupling, chain coupling, HRC coupling, normex coupling, FCL coupling, GE coupling, rigid and flexible coupling, jaw coupling, disc coupling, multi-beam coupling, universal joint, torque limiter, shaft collars.

Forging, Casting, Stamping Parts.
Other customized power transmission products and Machining Parts (OEM).

 

 

Application

 

1. Engineering: machine tools, foundry equipments, conveyors, compressors, painting systems, etc.

2. Pharmaceuticals& Food Processing: pulp mill blowers, conveyor in warehouse, agitators, grain, boiler, bakery machine, labeling machine, robots, etc.

3. Agriculture Industries: cultivator, rice winnower tractor, harvester, rice planter, farm equipment, etc.

4. Texitile Mills: looms, spinning, wrappers, high-speed auto looms, processing machine, twister, carding machine, ruler calendar machine, high speed winder, etc.

5. Printing Machinery: newspaper press, rotary machine, screen printer machine, linotype machine offset printer, etc.

6. Paper Industries: chipper roll grinder, cut off saw, edgers, flotation cell and chips saws, etc.

7. Building Construction Machinery: buffers, elevator floor polisher mixing machine, vibrator, hoists, crusher, etc.

8. Office Equipments: typewriter, plotters, camera, money drive, money sorting machine, data storage equipment, etc.

9. Glass and Plastic Industries: conveyor, carton sealers, grinders, creeper paper manufacturing machine, lintec backing, etc.

10. Home Appliances: vacuum cleaner, laundry machine, icecream machine, sewing machine, kitchen equipments, etc.

 

FAQ

Q: Are you trading company or manufacturer ?
A: We are factory.

Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: What is your terms of payment ?
A: Payment=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below:

 

Contacts

We warmly welcome friends from domestic and abroad come to us for business negotiation and cooperation for mutual benefit. To supply customers excellent quality products with good price and punctual delivery time is our responsibility.

Any question or inquiry, pls contact us without hesitate, we assure any of your inquiry will get our prompt attention and reply!
 

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Standard: DIN
Material: Cast Iron
Connection: for Taper Bore
Surface Treatment: Phosphide
Head Type: for Taper Bore
Certification: ISO9001:2015
Samples:
US$ 1/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

taper bush

Can I get recommendations for taper bushes with anti-corrosion properties?

Yes, there are taper bushes available in the market that offer anti-corrosion properties. These taper bushes are specifically designed to resist corrosion and maintain their functionality and performance in corrosive environments. When selecting taper bushes with anti-corrosion properties, consider the following recommendations:

  • Stainless Steel Taper Bushes: Stainless steel is a common material choice for taper bushes that require anti-corrosion properties. Stainless steel contains chromium, which forms a protective oxide layer on the surface, providing excellent resistance against corrosion. Taper bushes made from stainless steel are suitable for applications where exposure to moisture, chemicals, or other corrosive elements is expected.
  • Corrosion-Resistant Coatings: Some taper bushes undergo specialized coating processes to enhance their corrosion resistance. These coatings can include materials such as zinc, nickel, or other anti-corrosive substances. The coatings act as a barrier between the taper bush material and the corrosive environment, preventing or minimizing the effects of corrosion. Look for taper bushes that specify corrosion-resistant coatings in their product descriptions or consult with manufacturers for suitable options.
  • Polymer Taper Bushes: Certain polymer materials, such as high-performance plastics, offer inherent resistance to corrosion and are suitable for applications where anti-corrosion properties are required. Polymer taper bushes can be lightweight, non-metallic alternatives that provide excellent resistance to various corrosive substances, including chemicals and moisture.
  • Sealed or Enclosed Taper Bushes: In some cases, taper bushes are designed with additional features such as seals or enclosures to protect against corrosion. These seals or enclosures help prevent corrosive agents from reaching critical components of the taper bush, ensuring its long-term performance and resistance to corrosion. Look for taper bushes with integrated seals or inquire with manufacturers about options for enhanced corrosion protection.

When seeking taper bushes with anti-corrosion properties, it is essential to consider the specific requirements of your application, including the type of corrosive environment, temperature, and other operating conditions. Additionally, consult with taper bush manufacturers, suppliers, or industry experts who can provide recommendations based on their expertise and product knowledge.

By selecting taper bushes with anti-corrosion properties, you can ensure the longevity and reliability of your equipment in corrosive environments, reducing the need for frequent replacements and maintenance.

taper bush

Can I find taper bushes suitable for both metric and imperial shaft sizes?

Yes, it is possible to find taper bushes that are suitable for both metric and imperial shaft sizes. Taper bushes are designed to provide compatibility and versatility in power transmission systems, accommodating different shaft measurement systems. Here’s how you can find taper bushes suitable for both metric and imperial shaft sizes:

  • Dual Measurement Taper Bushes: Some taper bush manufacturers offer dual measurement taper bushes that are specifically designed to accommodate both metric and imperial shaft sizes. These taper bushes have dimensions and tolerances that allow them to fit and secure onto shafts measured in either the metric or imperial system. They provide a convenient solution for applications where both metric and imperial shafts are present, eliminating the need for separate taper bushes for each shaft measurement system.
  • Conversion Bushings: Conversion bushings or adapters can be used to bridge the gap between metric and imperial shaft sizes. These bushings typically have different bores on each end, allowing them to connect a metric taper bush to an imperial shaft or vice versa. By using conversion bushings, you can achieve compatibility between taper bushes and shafts measured in different systems, providing a flexible solution for mixed measurement applications.
  • Interchangeable Components: Some power transmission systems may utilize interchangeable components that can accommodate both metric and imperial shaft sizes. For example, certain pulleys, sprockets, or gears may have multiple sets of keyways or mounting configurations that can be used with taper bushes for both measurement systems. By selecting these interchangeable components, you can achieve compatibility with different shaft sizes without the need for separate taper bushes.
  • Consulting with Suppliers or Manufacturers: If you have specific requirements for taper bushes that can accommodate both metric and imperial shaft sizes, it is advisable to consult with suppliers or manufacturers directly. They can provide guidance and information on the availability of taper bushes suitable for mixed measurement applications. They may also offer customized or special order options to meet your specific needs.

When searching for taper bushes suitable for both metric and imperial shaft sizes, it is important to consider factors such as dimensional compatibility, tolerances, and the specific requirements of your power transmission system. Ensure that the taper bushes you choose are designed to securely fit and provide reliable connections with both metric and imperial shafts.

By exploring the options mentioned above and consulting with industry experts or suppliers, you can find taper bushes that can accommodate both metric and imperial shaft sizes, offering flexibility and compatibility in your power transmission system.

taper bush

Can I find a guide on installing taper bushes for various shaft sizes?

Yes, you can find guides on installing taper bushes for various shaft sizes. Manufacturers, suppliers, and industry resources often provide detailed installation guides and instructions to ensure proper installation and usage of taper bushes. Here’s how you can find a guide on installing taper bushes for different shaft sizes:

  • Manufacturer’s Websites: Many manufacturers of taper bushes include installation guides and manuals on their websites. Visit the official website of the taper bush manufacturer you are interested in, and look for the “Installation” or “Technical Resources” section. These guides typically provide step-by-step instructions, diagrams, and recommended tightening torque values for different shaft sizes.
  • Supplier Documentation: If you are purchasing taper bushes from a supplier or distributor, they may provide installation guides or documentation along with the product. Check the packaging or inquire with the supplier to see if they have any specific instructions or resources available.
  • Online Resources and Forums: Online resources, such as engineering forums, mechanical blogs, or industrial websites, often have articles or discussions on the installation of taper bushes. These resources may include practical tips, best practices, and real-life installation experiences shared by professionals in the field. Conduct a search using relevant keywords to find such resources.
  • Industry Publications: Industry publications, magazines, or technical journals related to mechanical engineering or industrial equipment may feature articles or guides on taper bush installation. These publications often provide comprehensive information and insights into various mechanical components and their installation procedures. Check both online and offline sources for relevant publications in your field.
  • Manufacturer or Supplier Support: If you have specific questions or need assistance with the installation of taper bushes for different shaft sizes, reach out to the manufacturer or supplier directly. They can provide personalized support, clarify any doubts, and guide you through the installation process based on your specific requirements.

When using a guide for installing taper bushes, it’s important to follow the instructions provided by the manufacturer or trusted industry sources. Pay attention to details such as proper alignment, recommended lubrication, tightening torque values, and any specific precautions mentioned in the guide. Adhering to the installation guidelines ensures a secure and reliable connection between the taper bush, the shaft, and the mating component.

Always prioritize safety when working with mechanical components. If you are unsure about any aspect of the installation process or encounter difficulties, consult with professionals or seek expert advice to ensure proper installation and minimize the risk of equipment failure or accidents.

China manufacturer Factory Price Cast Iron Taper Lock Bush Be Used with Couplings, Sprockets, and Power Transmission Elements Like V Pulleys& Timing Pulleys   bushing design		China manufacturer Factory Price Cast Iron Taper Lock Bush Be Used with Couplings, Sprockets, and Power Transmission Elements Like V Pulleys& Timing Pulleys   bushing design
editor by CX 2024-04-04

China Professional Wholesale Customized Factory Price 1108 3535 Cast Iron Pulleys Taper Bush cable bushing

Product Description

Taper lock bushing,

        1. Taper bushes form the most convenient and cost effective method of fixing components to a

            Mating shaft, without the need for any machining process.

        2. Size ranges from 1,more information,please contact us.

        3. Easy to install and remove.

        4. Shallow keyway is available.

To Install:

1.Clean shaft,bore,and outside of bushing,and bore of hub(taking bushing from hub if already assembled).Remove any oil.lacquer,or dirt.
Placing bushing in hub and match half holes to make complete holes(each complete hole will be threaded on 1 side only).

2.Oil thread and point of set screws or thread and under head of cap screws.
Place screws loosely in holes thatare threaded in hub 1 side see install bore.

3.Make sure bushing is free in hub.Slip assembly CHINAMFG shaft and locatd in position desired.

4.Tighten screws alternately and evenly until all are pulled up very tightly.Use a piece of pipe on wrench to increase leverage,
please refer to taper bushing screw torque which need to be asked.

5.If stall key,place it in the shaft keyway before install taper bushing.

6.After drive has been running under load for a short time stop and check tightness of screws.Fill other holes with grease to exclude dirt.

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Certification: ISO
Pulley Sizes: Type A
Manufacturing Process: Casting
Material: Iron
Surface Treatment: Oxygenation
Application: Chemical Industry, Grain Transport, Mining Transport, Power Plant
Samples:
US$ 1500/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

taper bush

Where can I find educational resources on the history and development of taper bushes?

If you’re interested in learning about the history and development of taper bushes, there are several educational resources available that can provide valuable insights. Here are some places where you can find such resources:

  • Books and Publications: Check libraries, bookstores, or online retailers for books and publications on mechanical engineering, power transmission, or machine elements. Look for titles that cover the history and development of mechanical components, including taper bushes. These resources often provide detailed information on the origins, evolution, and advancements in the design and application of taper bushes.
  • Engineering and Technical Journals: Explore engineering and technical journals that focus on mechanical engineering, manufacturing, or power transmission. These journals frequently publish research articles, case studies, and historical reviews that delve into the development and advancements of various mechanical components, including taper bushes. Access these journals through academic databases, online platforms, or professional engineering organizations.
  • Online Research Databases: Utilize online research databases such as IEEE Xplore, ScienceDirect, or Google Scholar to search for scholarly articles, conference papers, or research papers related to the history and development of taper bushes. These databases host a wide range of scientific and technical publications that can provide in-depth information on the subject.
  • Manufacturers and Suppliers: Taper bush manufacturers and suppliers often provide educational materials on their websites, including technical articles, whitepapers, or product catalogs. These resources may contain information about the history, design principles, and applications of taper bushes. Visit the websites of reputable manufacturers or reach out to them directly for educational materials.
  • Engineering Associations and Societies: Engineering associations and societies, such as the American Society of Mechanical Engineers (ASME), the Institution of Mechanical Engineers (IMechE), or similar organizations in your country, may offer resources on mechanical components and historical developments in engineering. Explore their websites, publications, or digital libraries for relevant information.

When accessing educational resources on the history and development of taper bushes, it is important to critically evaluate the credibility and reliability of the sources. Look for materials authored by recognized experts, academic institutions, or reputable organizations to ensure the accuracy of the information presented.

By utilizing these educational resources, you can deepen your understanding of the history and development of taper bushes, gaining insights into their evolution, technological advancements, and practical applications in various industries.

taper bush

Where can I find tutorials on removing and replacing taper bushes in machinery?

If you are looking for tutorials on removing and replacing taper bushes in machinery, there are several resources available that can provide step-by-step instructions and guidance. Here are some places where you can find tutorials on this topic:

  • Manufacturer or Supplier Websites: Many manufacturers or suppliers of taper bushes provide instructional materials on their websites. These tutorials may include written guides, videos, or diagrams that demonstrate the process of removing and replacing taper bushes in specific machinery. Visiting the websites of reputable taper bush manufacturers or suppliers and exploring their technical resources or support sections can often lead you to detailed tutorials.
  • Online Video Platforms: Websites such as YouTube, Vimeo, or Dailymotion host a vast collection of instructional videos on various topics, including machinery maintenance and repair. Searching for keywords like “taper bush removal” or “taper bush replacement” on these platforms can yield tutorial videos that demonstrate the process visually. These videos can be helpful in understanding the practical steps involved in removing and installing taper bushes.
  • Industrial Training Courses or Workshops: Some organizations or training institutes offer industrial maintenance or machinery repair courses that cover topics like taper bush removal and replacement. These courses may be available online or in-person, providing hands-on training and demonstrations. Participating in such training programs can give you a comprehensive understanding of the process and allow you to practice the skills under expert guidance.
  • Engineering or Mechanical Forums: Online forums or communities focused on engineering or mechanical topics often have dedicated sections or threads where users discuss machinery maintenance and repair procedures. Browsing through these forums or posting specific questions related to taper bush removal and replacement can help you find valuable insights, tips, and resources shared by professionals or experienced enthusiasts in the field.
  • Industry Publications or Books: Industrial magazines, books, or technical publications related to machinery maintenance and repair may include chapters or articles that cover taper bush removal and replacement. These resources often provide detailed explanations, accompanied by illustrations or diagrams, to guide you through the process. Checking relevant publications in the field of mechanical engineering or power transmission can provide you with in-depth tutorials.

When using tutorials, it’s important to ensure that the information is from reliable sources and applicable to your specific machinery and taper bush type. Always refer to the manufacturer’s instructions and follow proper safety procedures when working with machinery components.

By exploring these various resources, you can find tutorials on removing and replacing taper bushes in machinery, enabling you to perform these maintenance tasks effectively and safely.

taper bush

Where can I get information on the key dimensions of taper bushes for compatibility?

If you are looking for information on the key dimensions of taper bushes for compatibility, there are several sources where you can obtain this information. Here are some common places to find the key dimensions of taper bushes:

  • Manufacturer’s Catalogs and Websites: Taper bush manufacturers often provide detailed catalogs or product listings on their websites. These catalogs typically include comprehensive information about the dimensions, sizes, and specifications of their taper bushes. You can find details such as bore diameter, taper angle, outside diameter, keyway dimensions (if applicable), and overall length. Manufacturer catalogs are valuable resources for understanding the compatibility of taper bushes with different shaft sizes and mating components.
  • Engineering Handbooks and Reference Guides: Engineering handbooks and reference guides related to mechanical power transmission or bushing selection may contain information on the key dimensions of taper bushes. These resources are commonly available in libraries, technical bookstores, or online platforms. They provide in-depth knowledge about various types of bushings, including taper bushes, and offer guidance on selecting the appropriate size and dimensions based on shaft requirements.
  • Supplier or Distributor Documentation: If you are working with a specific supplier or distributor for taper bushes, they may provide documentation that includes dimensional information. This documentation can be in the form of product datasheets, brochures, or technical specifications. Check with your supplier or distributor to see if they have any resources available that outline the key dimensions of the taper bushes they offer.
  • Online Engineering Resources: Online platforms dedicated to mechanical engineering, industrial equipment, or power transmission systems can be excellent sources of information on taper bush dimensions. Websites, forums, or communities focused on mechanical engineering topics often have discussions, articles, or downloadable resources that include dimensional data for taper bushes. Conducting targeted searches using relevant keywords can help you find these online resources.
  • Consulting with Industry Experts: If you require specific or detailed information regarding the key dimensions of taper bushes for compatibility, consulting with industry experts or professionals in the field can be beneficial. These experts have practical experience and knowledge about power transmission systems and can provide guidance on selecting the appropriate taper bush dimensions based on your specific application requirements.

When accessing information on the key dimensions of taper bushes, it’s important to refer to reliable and trusted sources. Ensure that the information is up-to-date and aligns with industry standards. Double-check any measurements or specifications to ensure accuracy before making final decisions on taper bush compatibility.

By utilizing these various sources, you can gather the necessary information on the key dimensions of taper bushes to determine their compatibility with different shaft sizes and mating components in your power transmission system.

China Professional Wholesale Customized Factory Price 1108 3535 Cast Iron Pulleys Taper Bush   cable bushing	China Professional Wholesale Customized Factory Price 1108 3535 Cast Iron Pulleys Taper Bush   cable bushing
editor by CX 2024-03-26

China best V Belt Pulleys Wheel for Sale by Cast Iron 2bk160h with Good quality

Product Description

china professional factory high precision cast iron V-belt AK series light duty bored to size pulleys

1.Our V-Belt Pulley Includes

Light Duty Bored to size Pulleys (AK,BK,2AK,2BK,3BK series)

 

Light Duty Taper Bore Pulleys (AK-H,BK-H,2AK-H,2BK-H series)

 

Split taper bushed Pulleys (1TB,2TB,3TB series)

 

Heavy Duty QD Pulleys (1B,2B,3B,1C,2C,3C,4C,5C series etc)

 

Light Duty Variable Speed Pulleys (1VP,2VP,1VL,1VM series)

 

QD taper bore sheaves Pulleys (3V,5V,8V series)

 

Single Groove Pulleys (OK,OL,AL series)

 

According to customers’ requirements or drawings

2.Materials

Cast iron, steel, aluminium alloy, ect.

3.Surface treatment

powder coating, zinc plating, black oxided,etc

4.Standard

ANSI.API.BS.DIN.JIS.GB.etc.

5.Machine equipment

CNC center, CNC milling machine,CNC turning machine, CNC drilling

machine, CNC lathes, lathe, 4 axis machine etc.

6.Application field

Equipment accessories, Airplane, Ship, Bicycle, Motorcycle, Auto, Medical,Chemical, Wheel, Sports, Anchor, Weapon, etc.

7.Certification

ISO9001:2015

8.Warranty

One year after shippment

9. QC

1. Materials are to be checked carefully before production.

 

2.Strict processing quality control

 

3.100% inspection before shipment.

10.Inspection Equipment

CMM, Projection, Calipers, Micro caliper, Thread Micro caliper;Automatic Two / Three Coordinate Measuring Instrument etc;Third party inspection avaliable CZPT customer’s requirements

11.Shippment

TNT, FEDEX, DHL, UPS, EMS, by air, by sea

AK Series Sheave

AK17 to AK184

 

2AK20 to 2AK184

1)Widely used in the European & America market with good hardness and strength

2)AK /2AK SHEAVES, For “4L” or “A” Belts and “3L” BELTS

3)Material: Cast iron,Steel,aluminum alloy,etc

4)Finish: Gray Powder Paint,

Warehouse & Workshop

Testing Instrument

Our testing instrument includes Fully Automatic Three Coordinate,Measuring Instrument ,Fully Automatic Two Coordinate Measuring Instrument ,Element Measuring Instrument,etc.
Company Culture

We are professional manufacturer focus in shaft collars, split shaft collar,bushing,sheaves,pulleys,couplings,

weld-on hub,any question pls feel free to contact with us, look CZPT to work with you!

Certification: ISO
Pulley Sizes: Ak
Manufacturing Process: Casting
Material: Cast Iron
Surface Treatment: Coating
Application: Chemical Industry, Grain Transport, Mining Transport, Power Plant
Customization:
Available

|

Customized Request

bushing block
China best V Belt Pulleys Wheel for Sale by Cast Iron 2bk160h   with Good quality China best V Belt Pulleys Wheel for Sale by Cast Iron 2bk160h   with Good quality
editor by CX 2023-04-26

China Standard Timing Pulleys Synchrochain Standard and Non-Standard bushing press

Product Description

CZPT Taper Lock Bush:

The Taper Lock bush is a locking mechanism commonly used in Power Transmission Drives for locating pulleys,  sprockets,  and couplings to shafts. The Taper Lock bush is pre-bored and keyed to match the required shaft and keyway diameters.  The outside of the bush is tapered to match the component bore that is to be located on the shaft.
 
Ubet Taper bushes is manufactured from precision cast iron or carbon steel C45 with high quality finish. They are widely used to fit into Sheaves, Sprockets, Pins,  V-belt Pulleys and Timing Pulleys .
 
Features: 
·         No need for re machining.
·         No corrosion between bore and shaft.
·         Easy-On/Easy-Off
·         Material in Steel and cast iron are available
 
Types of Taper Bushings are available:
·         ANSI Split Taper Bushings
·         ANSI Taper Bore Bushings
·         ANSI QD Bushings
 
1008, 1108, 1210, 1215, 1310, 1610, 1615, 2012, 2517, 2525, 3571, 3030, 3535, 4040, 4545, 5050

 

Pulley Sizes: Timing
Manufacturing Process: Saw
Material: Aluminum
Surface Treatment: No
Application: Chemical Industry, Grain Transport, Mining Transport, Power Plant, Industry
Ht250 Gg25: Phosphating
Customization:
Available

|

Customized Request

bushing clamp
China Standard Timing Pulleys Synchrochain Standard and Non-Standard   bushing press		China Standard Timing Pulleys Synchrochain Standard and Non-Standard   bushing press
editor by CX