Product Description
Mighty’s High Quality Cast iron Taper Lock Taper Bushing for V Belt Pulley Sheaves
Taper lock bush
Taper lock bush is a new type of mechanical coupling components widely used in American and
European market.When driving a after a long time running,slot hole and chain may be damaged,
if this is the use of thetaper sleeve can be restored.Thus greatly improving the service life of the
transmission parts,reduce the maintenance cost,to save time.
Advantages of taper lock bush:
1.Material:High grade cast iron GG25;Steel C45
2.Surface treatment:Black-phosphate or original color without finishing
3.taper lock bush:Easy-on and easy-off
4.Machined to high precise tolerance
5.A full range of both metric and imperial sizes taper bushes are available
6.Complete short reach range available,for compact lightweight assemblies
Technical info of taper lock bush:
Bush No. | Bore |
1008 | 10.11.12.14.15.16.18.19.20.22.24.25 |
1108 | 10.11.12.14.15.16.18.19.20.22.24.25.28 |
1210 1215 | 11.12.14.15.16.18.19.20.22.24.25.28.30.32 |
1310 | 14.15.16.18.19.20.22.24.25.28.30.32.35 |
1610 1615 | 14.15.16.18.19.20.22.24.25.28.30.32.35.38.40.42 |
2012 2017 | 18.19.20.22.24.25.28.30.32.35.38.40.42.45.48.50 |
2517 2525 | 20.22.24.25.28.30.32.35.38.40.42.45.48.50.55.60 |
3571 3030 | 25.28.30.32.35.38.40.42.45.48.50.55.60.65.70.75 |
3525 3535 | 35.38.40.42.45.48.50.55.60.65.70.75.80.85.90 |
4030 4040 | 40.42.45.50.60.65.70.75.80.85.90.95.100 |
4535 4545 | 55.60.65.70.75.80.85.90.95.100.105.110 |
5040 5050 | 60.65.70.75.80.85.90.95.100.105.110.115.120.125 |
Company Information:
ZheJiang Mighty Machinery Co., Ltd. specializes in manufacturing Mechanical Power Transmission Products.
We Mighty is the division/branch of SCMC Group, which is a wholly state-owned company, established in 1980.
About Mighty:
-3 manufacturing factories, we have 5 technical staff, our FTY have strong capacity for design and process design, and more than
70 workers and double shift eveyday.
-Large quality of various material purchase and stock in warhouse which ensure the low cost for the material and production in
time.
-Strick quality control are apply in the whole prodution. we have incoming inspection,process inspection and final production
inspection which can ensure the perfect of the goods quality.
-14 years of machining experience. Long time cooperate with the Global Buyer, make us easy to understand the csutomer and handle the export.
MIGHTY’s products are mainly exported to Europe, America and the Middle East market. With the top-ranking management, professional technical support and abundant export experience, MIGHTY has established lasting and stable business partnership with many world famous companies and has got good reputation from CHINAMFG customers in international sales.
Mighty Main Products:
1) Timing Belt Pulley (Synchronous Pulley), Timing Bar, Clamping Plate;
2) Forging, Casting, Stampling Part;
3) V Belt Pulley and Taper Lock Bush; Sprocket, Idler and Plate Wheel;Spur Gear, Bevel Gear, Rack;
4) Shaft Locking Device: could be alternative for Ringfeder, Sati, Chiaravalli, Tollok, etc.;
5) Shaft Coupling:including Miniature couplings, Curved tooth coupling, Chain coupling, HRC coupling, Normex coupling, Type coupling, GE Coupling, torque limiter, Universal Joint;
6) Shaft Collars: including Setscrew Type, Single Split and Double Splits;
7) Timing Belt: including Rubber and PU timing belts for industrial;
8) Other customized Machining Parts according to drawings (OEM).
FAQ:
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment=10000USD, 30% T/T in advance ,balance before shippment
We warmly welcome friends from domestic and abroad come to us for business negotiation and cooperation for mutual benefit.To supply customers excellent quality products with good price and punctual delivery time is our responsibility.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Certification: | ISO |
---|---|
Pulley Sizes: | 1008, 1108, 1210, 1610, 2517, 3020, 3030 etc. |
Material: | Cast Iron, Steel |
Surface Treatment: | Black Oxide, Phosphating |
Application: | Chemical Industry, Grain Transport, Mining Transport, Power Plant, etc. |
Size: | Metric & Inch |
Samples: |
US$ 1/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
| Customized Request |
---|
Can I get advice on choosing taper lock bushings for specific industry applications?
Yes, you can seek advice on choosing taper lock bushings for specific industry applications. There are various sources where you can find guidance from industry professionals, manufacturers, and experts who can help you select the appropriate taper lock bushings for your specific application requirements. Here are some avenues to obtain advice on choosing taper lock bushings:
- Manufacturer Technical Support: Contacting the technical support teams of taper lock bushing manufacturers can be a valuable resource. Manufacturers have in-depth knowledge of their products and can provide guidance based on your specific application parameters, such as torque, shaft size, or environmental conditions. They can help you select the right taper lock bushing model, material, and size to ensure optimal performance and reliability in your industry application.
- Industry Trade Shows and Conferences: Attending industry trade shows, conferences, or seminars related to power transmission, mechanical engineering, or specific industries can provide opportunities to interact with experts and professionals. These events often feature exhibits by manufacturers and distributors of power transmission components, including taper lock bushings. Engaging with representatives at these events can allow you to discuss your application requirements and receive advice on selecting the most suitable taper lock bushings.
- Industrial Consultants: Hiring the services of industrial consultants or engineering firms that specialize in power transmission or mechanical engineering can provide expert advice tailored to your specific industry application. These consultants can assess your application requirements, conduct analysis, and recommend the appropriate taper lock bushings based on their extensive experience and knowledge of industry best practices.
- Online Forums and Communities: Participating in online forums and communities dedicated to power transmission, mechanical engineering, or industry-specific discussions can connect you with professionals and enthusiasts who can provide advice on choosing taper lock bushings. Platforms like Eng-Tips, Mechanical Engineering Stack Exchange, or industry-specific forums allow you to post questions, share details about your application, and seek recommendations from individuals who have experience in similar applications.
- Professional Networks: Leveraging your professional network can be another way to obtain advice on selecting taper lock bushings for specific industry applications. Engaging with colleagues, industry peers, or mentors who have expertise in power transmission or mechanical engineering can provide valuable insights and recommendations based on their firsthand experience or industry connections.
When seeking advice on choosing taper lock bushings, it is important to provide comprehensive information about your specific application requirements, including operating conditions, load factors, shaft sizes, and any other relevant parameters. This will enable the advisors to offer more accurate and tailored recommendations.
By utilizing these sources, you can access advice from experts and professionals who can guide you in selecting the most appropriate taper lock bushings for your specific industry applications. Their expertise can help you ensure reliable and efficient operation of your machinery or equipment.
What are the common materials used in manufacturing taper lock bushings?
When it comes to manufacturing taper lock bushings, several common materials are used, each with its own unique properties and advantages. The choice of material depends on factors such as application requirements, environmental conditions, and desired performance characteristics. Here are some of the commonly used materials in the manufacturing of taper lock bushings:
- Steel: Steel is one of the most prevalent materials used for taper lock bushings due to its excellent strength, durability, and wear resistance. Different grades of steel, such as carbon steel or alloy steel, can be utilized based on the specific application requirements. Steel bushings are capable of withstanding high loads and are suitable for a wide range of industrial applications.
- Stainless Steel: Stainless steel is chosen for taper lock bushings when corrosion resistance is a crucial factor. Stainless steel exhibits excellent resistance to rust, oxidation, and chemical corrosion, making it suitable for applications in harsh or corrosive environments. It is commonly used in industries such as food processing, marine, and pharmaceuticals.
- Cast Iron: Cast iron is a popular material for taper lock bushings, known for its high strength, durability, and vibration damping properties. Cast iron bushings can effectively absorb and dampen vibrations, reducing the risk of damage to the shaft and other components. They are commonly used in applications where shock absorption and noise reduction are essential.
- Bronze: Bronze is chosen for taper lock bushings when self-lubrication and low friction are desired. Bronze bushings have excellent bearing properties and can operate without additional lubrication, which makes them suitable for applications where maintenance or lubrication is challenging. They are often used in equipment such as conveyors, pumps, and agricultural machinery.
- Plastics and Polymers: Various plastics and polymers, such as nylon, polyurethane, or PTFE (polytetrafluoroethylene), are used for manufacturing taper lock bushings. These materials offer advantages such as low friction, self-lubrication, corrosion resistance, and electrical insulation properties. Plastic or polymer bushings are commonly used in applications where lightweight, non-metallic components are desired.
It’s important to note that the material selection for taper lock bushings should be based on the specific requirements of your application, including factors like load capacity, operating conditions, temperature range, and compatibility with the mating shaft and driven component. Manufacturers and suppliers of taper lock bushings can provide guidance on material selection based on their product offerings and expertise.
By considering the properties and characteristics of different materials, you can choose the most appropriate material for your taper lock bushings, ensuring optimal performance and longevity in your power transmission system.
Can I find a step-by-step guide on installing taper lock bushings for various shaft sizes?
Yes, you can find step-by-step guides on installing taper lock bushings for various shaft sizes. Manufacturers of taper lock bushings often provide detailed installation instructions and guidelines to ensure proper and efficient installation. Here’s an overview of the typical installation process:
- Start by gathering the necessary tools and equipment for the installation, which may include a torque wrench, Allen wrenches or socket wrenches, and a hammer or mallet.
- Clean the shaft and the bore of the driven component to remove any dirt, debris, or rust that may hinder a proper fit. Ensure both surfaces are dry and free from contaminants.
- Select the appropriate taper lock bushing size that matches the shaft diameter of your application. Refer to the manufacturer’s specifications or guidelines to determine the correct size.
- Slide the taper lock bushing onto the shaft, ensuring that it is positioned at the desired location on the shaft.
- Align the keyway (if present) on the shaft with the corresponding keyway in the taper lock bushing. This ensures proper torque transmission and prevents rotational slippage.
- Using an Allen wrench or socket wrench, tighten the screws or bolts on the taper lock bushing in a cross-pattern. Gradually tighten each screw or bolt in small increments to ensure even compression and a secure fit. Refer to the manufacturer’s recommended torque values for tightening.
- Once the screws or bolts are tightened, tap the outer flange or collar of the taper lock bushing gently with a hammer or mallet. This helps to ensure that the bushing is fully seated and provides a tight connection.
- Inspect the installation to ensure that the taper lock bushing is securely mounted on the shaft and that there is no visible gap between the bushing and the driven component. Verify that the keyway engagement is proper, and the bushing is concentric with the shaft.
- If the driven component has additional tightening screws or bolts, follow the manufacturer’s instructions to secure it to the taper lock bushing.
- Perform a final inspection and test the rotation of the assembly to ensure smooth operation and proper alignment.
It is important to note that the specific installation process may vary slightly depending on the manufacturer, the type of taper lock bushing, and the driven component. Therefore, it is crucial to refer to the manufacturer’s installation instructions and guidelines for your specific taper lock bushing model.
Manufacturer catalogs, websites, and technical resources dedicated to power transmission components are valuable sources for finding detailed step-by-step installation guides. These resources often include diagrams, illustrations, and additional tips to ensure a successful installation.
By following a reliable installation guide and adhering to the manufacturer’s instructions, you can properly install taper lock bushings on various shaft sizes, ensuring a secure and efficient connection in your mechanical applications.
editor by CX 2024-04-29
China Best Sales Qd Sheaves Belt Pulley 6 5V 520 SD bushing replacement
Product Description
V-belt pulley introduce:
V- belt pulley of different types ( according to type and width of belts). The material used is cast iron EN-GJL-250 CZPT EN 1561, and for only a few types it is steel C45 E CZPT EN 10083-1. They have a small prebore that can be machined according to customers’ requirements. Moreover the most common types are available also with taperlock bore.
V belt pulley specifications
· European standards :
a) V-belt pulley for taper bushing: SPZ, SPA, SPB, SPC
b) Adjustable speed V-belt pulleys and variable speed pulleys
c) Flat belt pulleys and conveyor belt pulleys
· American standard:
a) Sheaves for taper bushing: 3V, 5V, 8V
b) Sheaves for QD bushings: 3V, 5V, 8V
c) Sheaves for split taper bushing: 3V, 5V, 8V
d) Sheaves for 3L, 4L or A, and 5L or B belts: AK, AKH,2AK, 2AKH, BK, BKH,2BK, 2BKH, 3BK
e) Adjustable sheaves: poly V-pulley, multi-pitch H, L, J, K and M
· Bore: pilot bore, finish bore, taper bore, bore for QD bushing
· Parts can be made according to drawings and/or samples
· we can offer the rang size diameter 62MM~2000MM
Prouducts show:
Our stock show
Our manufacture workshop
Packing show
Catalogue
FAQ
Q1. What is your terms of packing?
A: Generally, we pack our goods in single color box. If you have special request about packing, pls negotiate with us in advance, we can pack the goods as your request.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages
before you pay the balance. Other payments terms, pls negotiate with us in advance, we can discuss.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF.
Q4. How about your delivery time?
A: Generally, it will take 25 to 30 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and
the courier cost.We welcome sample order.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q8: How do you make our business long-term and good relationship?
1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.
Certification: | CE, ISO |
---|---|
Pulley Sizes: | Type C |
Manufacturing Process: | Casting |
Material: | Carbon Steel |
Surface Treatment: | Polishing |
Application: | Chemical Industry, Grain Transport, Mining Transport, Power Plant |
Samples: |
US$ 1/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
| Customized Request |
---|
bushing and ball joint
editor by CX 2023-05-17
china Custom Belt Sheaves Hub Lock Bushes Timing Metal Bore Sprocket Gear Transmission Machine Parts Manufacture Best Sale Durable European Standard Durable Pulleys manufacturers
Product Description
Belt Sheaves Hub Lock Bushes Timing CZPT Bore CZPT Gear Transmission CZPT Elements CZPT Ideal Sale CZPT CZPT pean Normal CZPT Pulleys
belt pulley wheel
Layout your belt travel system using CZPT Centre Length Designer. This calculator computes belt lengths for CZPT heart distances and checks the quantity of tooth in mesh for the two pulleys. It calculates pulley generate ratios and the minimum center distance for a designated pulley pair.
The Centre Length Designer displays all CZPT pulleys and belts that match within your conditions. Simply click on the component number for quick access to merchandise technical specs, 3D CAD Models, pricing and availability. Belts and pulleys ship within 24 hrs from stock. If a common catalog product will not meet up with your requirements we can give CZPT alternatives
china near me shop Belt Sheaves Hub Lock Bushes Timing Metal Bore Sprocket Gear Transmission Machine Parts Manufacture Best Sale Durable European Standard Durable Pulleys manufacturers
Merchandise Description
Belt Sheaves Hub Lock Bushes Timing CZPT Bore CZPT Gear Transmission CZPT Elements CZPT Greatest Sale CZPT CZPT pean Common CZPT Pulleys
belt pulley wheel
Design and style your belt travel program employing CZPT Middle Length Designer. This calculator computes belt lengths for CZPT heart distances and checks the number of teeth in mesh for the two pulleys. It calculates pulley travel ratios and the minimum heart distance for a selected pulley pair.
The Center Distance Designer shows all CZPT pulleys and belts that in shape in your criteria. Simply click on the element variety for instantaneous access to item specs, 3D CAD Models, pricing and availability. Belts and pulleys ship inside 24 several hours from inventory. If a common catalog product isn’t going to fulfill your requirements we can offer CZPT options
Conical locking bushings have been rooted in standard and series drives as a basic hub-to-hub connection. EP gives a total range of push components, the two regular, and custom made. These aspects are offered from inventory in common measurements 1008 to 5050 and special measurements 6050 to 10085 for all inner diameters. Benefit from our massive item selection, in depth storage warehouses, quick-expression availability, and the likelihood to rapidly create customized products from one provider.
china near me Flat Taper Lock Taper Bushe 3L 4L a 5L and B Keyless with Prebored Solid Hub Spz SPA Spb Spc Belt Sheaves Pulley High Quality manufacturers
Merchandise Description
Flat taper lock Taper Bushe 3L 4L A 5L and B keyless with prebored solid hub SPZ SPA SPB SPC Belt Sheaves pulley high high quality
one) V-Belt pulleys for taper bushes
SPZ
|
SPA
|
SPB
|
SPC
|
two)V-belt pulleys with solid hub
SPZ
|
SPA
|
SPB
|
SPC
|
three) Adjustable CZPT V-belt pulleys prebored and for taper bushes
Variety | Profile |
5VS092-1 | 10X6 SPZ |
5VS093-one | 10X6 13X8 |
5VS108-one | 10X6 13X8 SPZ SPA |
5VS120-1 | 10X6 13X8 SPZ SPA |
5VS138-1 | 10X6 13X8 SPZ SPA |
5VS159-one | 10X8 SPA |
5VS180-one | 10X8 17X11 SPA SPB |
5VS120-2 | 10X6 13 X8 SPZ SPA |
5VS138-2 | 10X6 thirteen X8 SPZ SPA |
5VS159-two | 13X8 SPA |
5VS180-two | 13X8 17X11 SPA SPB |
5VS200-2 | 13X8 17X11 SPA SPB |
5VS250-2 | 13X8 17X11 SPA SPB SPC |
What is the purpose of the tapered bushing? Tapered bushings are commonly used to mount pulleys, sprockets and pulleys on shafts. They are break up, have no flange bushings, use screws to hold the shaft, and give excellent clamping power. Tapered bushings are typically utilised for recessed ceiling lights because they have an even mounting spacing and, if mounted accurately, they are extremely successful in large torque purposes.
china best Phosphated Cast Iron Taper Bushing for V Belt Sheaves and V Belt Pulleys manufacturers
Product Description
Product Description
1) Feature of Taper Bushing:
*Easy on-easy off
*Machined to high precise tolerance
*A full range of both metric and inch sizes taper bushes are available
two) Taper Bushings Specification:
Bushing No. | Bore |
1008 | ten.eleven.twelve.14.15.sixteen.18.19.twenty.22.24.25 |
1108 | ten.11.12.14.15.sixteen.eighteen.19.20.22.24.25.28 |
1210 1215 | 11.twelve.14.15.16.18.19.20.22.24.25.28.thirty.32 |
1310 | fourteen.15.16.18.19.20.22.24.25.28.thirty.32.35 |
1610 1615 | fourteen.15.16.18.19.twenty.22.24.25.28.30.32.35.38.forty.forty two |
2012 2017 | eighteen.19.twenty.22.24.25.28.30.32.35.38.forty.forty two.forty five.forty eight.fifty |
2517 2525 | twenty.22.24.twenty five.28.thirty.32.35.38.40.forty two.forty five.48.fifty.fifty five.60 |
3571 3030 | twenty five.28.thirty.32.35.38.forty.42.45.forty eight.fifty.55.sixty.sixty five.70.seventy five |
3525 3535 | 35.38.forty.42.45.48.50.55.sixty.65.70.75.80.85.ninety |
4030 4040 | forty.42.forty five.50.sixty.65.70.seventy five.eighty.85.90.ninety five.100 |
4535 4545 | fifty five.sixty.sixty five.70.seventy five.eighty.eighty five.ninety.95.one hundred.a hundred and five.a hundred and ten |
5040 5050 | 60.65.70.seventy five.eighty.85.ninety.95.one hundred.one hundred and five.a hundred and ten.one hundred fifteen.a hundred and twenty.one hundred twenty five |
Detailed Images
Solid iron taper bushing, phosphated
Carbon metal taper bushing
Each set separately packed
Large inventory in warehouse
Catalogue
Packaging & CZPT
Export wood box
FAQ
Q1: Are you buying and selling firm or maker ?
A: We are manufacturing facility.
Q2: How CZPT is your delivery time and shipment?
one.Sample CZPT -occasions: ten-twenty days
2.Generation CZPT -moments: 30-45 times after purchase verified.
Q3: What is your positive aspects?
one. The most aggressive price tag and very good quality.
two. Ideal technical engineers give you the ideal assist.
three. CZPT is CZPT .
How does a tapered bushing operate? The tapered part of the part is driven by way of a large-power screw with a mating hub, making it possible for the bushing to be securely fixed to the shaft. The pressure of the clamp can transmit higher torque (rotational pressure). This design and style makes certain that a efficiently installed sprocket and pulley shaft are aligned with basic positioning.
china wholesaler High Quality Flat Taper Lock Taper Bush 3L 4L a 5L and B Keyless with Prebored Solid Hub Spz SPA Spb Spc Belt Sheaves Pulley manufacturers
Product Description
Flat Taper Lock Taper Bush 3L 4L a 5L and B Keyless with Prebored Strong Hub Spz SPA Spb Spc Belt Sheaves Pulley CZPT Quality
pulley machine
1) V-Belt pulleys for taper bushes
SPZ
|
SPA
|
SPB
|
SPC
|
two)V-belt pulleys with solid hub
SPZ
|
SPA
|
SPB
|
SPC
|
3) Adjustable CZPT V-belt pulleys prebored and for taper bushes
Kind | Profile |
5VS092-one | 10X6 SPZ |
5VS093-one | 10X6 13X8 |
5VS108-1 | 10X6 13X8 SPZ SPA |
5VS120-1 | 10X6 13X8 SPZ SPA |
5VS138-one | 10X6 13X8 SPZ SPA |
5VS159-1 | 10X8 SPA |
5VS180-one | 10X8 17X11 SPA SPB |
5VS120-2 | 10X6 13 X8 SPZ SPA |
5VS138-2 | 10X6 thirteen X8 SPZ SPA |
5VS159-two | 13X8 SPA |
5VS180-two | 13X8 17X11 SPA SPB |
5VS200-2 | 13X8 17X11 SPA SPB |
5VS250-2 | 13X8 17X11 SPA SPB SPC |
Conical locking bushings have been rooted in common and sequence drives as a easy hub-to-hub relationship. EP gives a full variety of drive aspects, equally common, and custom made. These elements are offered from stock in common dimensions 1008 to 5050 and special dimensions 6050 to 10085 for all internal diameters. Benefit from our big item range, substantial storage warehouses, limited-term availability, and the chance to quickly produce personalized items from one supplier.