Product Description
Chinese Manufacturer Tapered locking Cast iron bushing for large compressor belt tensioner pulley Taper Lock Bush
install
1. Clean the shaft, bushing hole, bushing outside, and components (sprocket, pulley,
Etc.).
2. Insert the bushing into the assembly. Match hole patterns, not threaded holes (each hole is threaded on 1 side only).
3. Screw the set screw or cap screw into the half-threaded hole as shown in the figure below. Install the assembly CHINAMFG the shaft.
4. Replace the torque setting or cap screw with the recommended torque setting in the following table.
5. Fill all unoccupied holes with grease.
Company Information
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Type: | Agricultural |
|---|---|
| Usage: | Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying |
| Material: | Stainless Steel |
| Power Source: | Electricity |
| Weight: | 6kg |
| After-sales Service: | Installation Guide 3-Year Warranty |
| Customization: |
Available
| Customized Request |
|---|
What are the temperature and environmental considerations when using taper lock bushings?
When using taper lock bushings, it is important to consider the temperature and environmental conditions in which the bushings will operate. These factors can have a significant impact on the performance, durability, and overall effectiveness of the bushings. Here are some key considerations:
- Temperature Range: Taper lock bushings are typically designed to operate within specific temperature ranges. Exceeding these temperature limits can result in reduced performance, increased wear, or even failure of the bushings. It is crucial to consult the manufacturer’s specifications and guidelines to ensure that the bushings are suitable for the anticipated temperature range in your application. Extreme temperatures, whether hot or cold, can affect the material properties, dimensional stability, and lubrication characteristics of the bushings.
- Corrosive Environments: In environments where corrosive substances are present, such as chemicals, moisture, or saltwater, special considerations must be taken. Corrosion can deteriorate the surface finish and structural integrity of the taper lock bushings, leading to premature failure. It is important to select bushings that are made from materials resistant to corrosion, such as stainless steel or corrosion-resistant coatings. Regular inspection, cleaning, and proper maintenance can also help mitigate the effects of corrosive environments.
- Dust, Dirt, and Contaminants: Taper lock bushings operating in dusty or dirty environments can be prone to accelerated wear and decreased performance. Dust, dirt, and other contaminants can infiltrate the bushing interface, impairing the locking mechanism or causing excessive friction. Regular cleaning, protective covers or guards, and appropriate sealing measures can help minimize the effects of contaminants on the bushings.
- Moisture and Humidity: Moisture and high humidity levels can promote corrosion, rust, or the formation of oxidation on the surface of taper lock bushings. This can lead to increased friction, reduced locking efficiency, and potential damage to the bushings. Using moisture-resistant materials, applying protective coatings, and ensuring proper lubrication can help mitigate the negative effects of moisture and humidity.
- Shock and Vibration: Taper lock bushings may be subjected to shock and vibration in certain applications. Excessive shock and vibration can lead to loosening of the bushings, misalignment, or even complete disengagement from the shaft. It is important to consider the magnitude and frequency of shock and vibration in the operating environment and select bushings that are designed to withstand such conditions. Additional measures such as using locking compounds, thread-locking adhesives, or anti-vibration mounts can enhance the stability and reliability of the bushings.
Understanding and addressing these temperature and environmental considerations can help ensure optimal performance and longevity of taper lock bushings in your specific application. It is recommended to consult the manufacturer’s guidelines, industry standards, and experts in the field to determine the most suitable bushings and maintenance practices for your operating conditions.
Can I get recommendations for taper lock bushings with anti-corrosion properties?
Yes, you can receive recommendations for taper lock bushings with anti-corrosion properties. When corrosion resistance is a crucial requirement for your application, selecting the right material and coating for the bushings is essential. Here are some recommendations for taper lock bushings with anti-corrosion properties:
- Stainless Steel Bushings: Stainless steel bushings are an excellent choice for applications requiring corrosion resistance. Stainless steel contains chromium, which forms a protective oxide layer on the surface, providing resistance against rust, oxidation, and other forms of corrosion. Look for taper lock bushings made from high-quality stainless steel, such as 304 or 316 grades, which offer enhanced corrosion resistance.
- Plated or Coated Bushings: Another option is to select taper lock bushings that are plated or coated with anti-corrosion materials. These coatings provide an additional layer of protection to the underlying material. Some common coating options include zinc plating, nickel plating, or various polymer coatings. These coatings act as a barrier against moisture, chemicals, and other corrosive elements, extending the lifespan of the bushings.
- Polymer Bushings: Certain polymer materials, such as nylon or PTFE (polytetrafluoroethylene), exhibit excellent resistance to corrosion. These polymer bushings are inherently non-metallic and do not require additional coatings. They are particularly suitable for applications where the presence of moisture, chemicals, or other corrosive substances is a concern. Polymer bushings also offer advantages such as low friction and self-lubrication.
- Specialized Coatings: In some cases, specialized coatings or treatments may be available for taper lock bushings to enhance their corrosion resistance. For instance, bushings may undergo processes like passivation or chemical treatments to improve their resistance to specific corrosive agents. These specialized options can be explored based on the specific requirements of your application and the recommendations provided by bushing manufacturers.
When selecting taper lock bushings with anti-corrosion properties, it is important to consider factors such as the operating environment, exposure to chemicals or moisture, temperature range, and the compatibility of the bushing material with other components in the system. Manufacturers and suppliers of taper lock bushings can provide guidance on the most suitable options for your specific application.
By choosing taper lock bushings with anti-corrosion properties, you can ensure the longevity and reliability of your power transmission system, even in environments where corrosion is a concern.
What are the advantages of using taper lock bushings in power transmission systems?
Taper lock bushings offer several advantages when used in power transmission systems. These advantages contribute to their widespread adoption and popularity in various industrial applications. Here are some key advantages:
- Ease of Installation: Taper lock bushings are designed for easy and straightforward installation. They can be quickly mounted on the shaft without the need for extensive disassembly or specialized tools. This ease of installation reduces downtime during equipment assembly or maintenance, saving valuable time and labor costs.
- Secure Shaft Connection: Taper lock bushings provide a secure and reliable connection between the shaft and the driven component. Their tapered design ensures a tight fit and eliminates slippage or movement between the two components. This secure connection allows for efficient power transmission, minimizing energy loss and maximizing system performance.
- Versatility: Taper lock bushings are available in a wide range of sizes to accommodate different shaft diameters. This versatility makes them suitable for various applications across different industries. Whether you have fractional inch shafts or metric measurements, you can find taper lock bushings that fit your specific requirements.
- Interchangeability: Taper lock bushings are designed to be interchangeable, meaning they can be easily replaced or swapped out when needed. This interchangeability simplifies maintenance and repairs, as a damaged or worn-out bushing can be replaced without replacing the entire shaft or driven component. It also provides flexibility in adapting power transmission systems to changing needs or requirements.
- High Torque Transmission: Taper lock bushings are capable of transmitting high torque loads between the shaft and the driven component. Their secure grip and uniform distribution of forces allow for efficient power transmission, even in demanding applications with substantial torque requirements.
- Cost-Effectiveness: Taper lock bushings offer a cost-effective solution for power transmission systems. They are generally more affordable compared to alternative methods of shaft connection, such as keyway and set screw arrangements. Additionally, their ease of installation and interchangeability contribute to reduced maintenance and replacement costs over time.
- Wide Compatibility: Taper lock bushings can be used with various types of driven components, including pulleys, sprockets, gears, and couplings. This wide compatibility allows for versatile application in different power transmission systems, making them a versatile choice for many industries.
Overall, taper lock bushings offer a combination of ease of installation, secure connection, versatility, and cost-effectiveness, making them a popular choice for power transmission systems. Their advantages contribute to improved system performance, reduced downtime, and increased operational efficiency in industrial applications.
editor by CX 2024-04-23
China Air Compressor Belt Pulley SPA630-03 Cast Iron V Belt Pulley Taper Bushed Sheave bushing adapter
Product Description
Product Description
1. In power transmission, belts are flexible loops of material that can link 2 rotating shafts mechanically and transmit power between them. Belts are also the primary component in belt drives, where 1 or more continuous belts are fitted over 2 pulleys at 2 shafts and rotary motion is transferred from the driving pulley to the driven pulley.
2. As compared to chain drives and gear drives, belt drives run quietly and smoothly and do not need lubrication. Maintenance is also comparatively convenient, and the driven shaft speed can be easily altered by changing pulley sizes.
3. The most common types of belts are V-belts and timing belts. V-belts are the most common type of belt today, and as their name suggests, their cross-sectional shape comes in the form of a “V”. Generally endless, the “V” cross-sections of these belts lodge in the mating grooves of their corresponding V-belt pulleys, preventing slipping due to under-10sioning. In general, V-belts require less width and tension compared to flat belts.
4. Timing belts are toothed belts that enable positive drive. They have rows of interlocking teeth that fit securely with a toothed pulley to avoid slipping. Timing belts require less tension than other belts, have no slippage, and do not require lubrication, however their power capacity is lower than V-belts and chains. They are frequently used in camshafts of automobiles and crankshafts.
Features
1) European standard:
a) V-belt pulleys for taper bushings: SPZ, SPA, SPB, SPC; up to 10 grooves
b) Adjustable speed V-belt pulleys and variable speed pulleys
c) Flat belt pulleys and conveyor belt pulleys
2) American standard:
a) Sheaves for taper bushings: 3V, 5V, 8V
b) Sheaves for QD bushings: 3V, 5V, 8V
c) Sheaves for split taper bushings: 3V, 5V, 8V
d) Sheaves for 3L, 4L or A, and 5L or B belts: AK, AKH,2AK, 2AKH, BK, BKH,2BK, 2BKH, 3BK
e) Adjustable sheaves: poly V-pulley, multi-pitch H, L, J, K and M
Parts can be made according to drawings and/or samples, OEM service is welcomed.
3) Bore type: pilot bore, finished bore, taper bore, bore for QD bushing.
4) Surface finish: paint, phosphating, zinc plated.
5) Material: cast iron, ductile iron, nylon, aluminum.
6) Made according to drawings and/or samples, OEM inquiries welcomed.
Detailed Photos
Product Parameters
Packaging & Shipping
| Package |
Standard suitable package / Pallet or container. |
| Shipping |
10-20working days ofter payment receipt comfirmed (based on actual quantity). Professional goods shipping forward. |
Company Profile
FAQ
Q: Are you manufacturer or trading company?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment=1000USD, 30% T/T in advance ,balance before shippment.
We warmly welcome friends from domestic and abroad come to us for business negotiation and cooperation for mutual benefit. To supply customers excellent quality products with good price and punctual delivery time is our responsibility.
|
US $4.8-20.5 / Piece | |
5 Pieces (Min. Order) |
###
| Certification: | ISO |
|---|---|
| Manufacturing Process: | Casting |
| Material: | Cast Iron |
| Surface Treatment: | Black Oxide, Phosphated |
| Application: | Chemical Industry, Grain Transport, Mining Transport, Power Plant |
| Diameter: | Standard or Customized |
###
| Samples: |
US$ 0/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Package |
Standard suitable package / Pallet or container. |
| Shipping |
10-20working days ofter payment receipt comfirmed (based on actual quantity). Professional goods shipping forward. |
|
US $4.8-20.5 / Piece | |
5 Pieces (Min. Order) |
###
| Certification: | ISO |
|---|---|
| Manufacturing Process: | Casting |
| Material: | Cast Iron |
| Surface Treatment: | Black Oxide, Phosphated |
| Application: | Chemical Industry, Grain Transport, Mining Transport, Power Plant |
| Diameter: | Standard or Customized |
###
| Samples: |
US$ 0/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Package |
Standard suitable package / Pallet or container. |
| Shipping |
10-20working days ofter payment receipt comfirmed (based on actual quantity). Professional goods shipping forward. |
with high quality
editor by czh 2022-11-30
china shop Cast Iron V Groove Belt Pulleys for Air Compressor manufacturers
Solution Description
Cast Iron V Groove Belt Pulleys for Air CZPT
| Item | Bore Variety | Type |
| European Standard V Belt Pulley |
TB Bore & |
SPA |
| SPB | ||
| SPC | ||
| SPZ | ||
| Poly V Pulleys (Inch & Metric) |
TB Bore & Pilot Bore |
J3, J4, J5, J6, J8, J12, J16, J20 |
| L5, L6, L8, L10, L12, L16, L20 | ||
| M6, M10, M16, M20 | ||
| Adjustable Pulleys | TB Bore | Z1, A1, A2, B1, B2 |
| American Normal Sheaves | STB & QD & TB Bushed | AK/AKH, BK/BKH, TA/TB/TC, B/C/D, 3V/5V/8V |
| Split Pulleys | Fixed Bore | PM |
| P.M Hubs | V/W | |
| AS/BS Series Sheaves | AS/BS | |
| Ok/OL/AL Collection Sheaves | Ok/OL/AL/AM | |
| Variable Sequence Sheaves | VP/VL/VM |
Principal Merchandise:
1. Timing Belt Pulley (Synchronous Pulley), Timing Bar, Clamping Plate
2. Forging, Casting, Stampling Part
three. V Belt Pulley and Taper Lock Bush Sprocket, Idler and Plate WheelSpur Gear, Bevel Gear, Rack
four. Shaft Locking Device: could be alternative for Ringfeder, Sati, Chiaravalli, Tollok, etc.
5. Shaft Coupling: including Miniature couplings, Curved tooth coupling, Chain coupling, HRC coupling,
Normex coupling, Type coupling, GE Coupling, torque limiter, Universal Joint
six. Shaft Collars: including Setscrew Type, Single Split and Double Splits
seven. Gear & Rack: Spur equipment/rack, bevel gear, CZPT cal equipment/rack.
8. CZPT customized Machining Parts according to drawings (OEM) Forging, Casting, Stamping Parts.
Packaging & CZPT :
All the products can be packed in cartons,or,you can choose the pallet packing.
MADE IN CHINA can be pressed on wooden cases.Land,air,sea transportation are available.UPS,DHL,TNT,
FedEx and EMS are all supported.
Company Introduction:
Manufacturing facility See:
Exhibition:
FAQ:
one. MOQ
A: Generally, 1 computer for common elements speak to for CZPT normal elements.
2. Delivery Time
A: In stock: inside 5 functioning times. Out of stock: is dependent on your get amount.
3. How To Decide on
A: element variety or drawing, catalogue. If no, you can send us your sample, so we can make the drawing and sample accordingly.
four: What is the Warranty for your items?
A:Typically CZPT warranty is 1 calendar year.
Contacts:
A tapered bushing, also identified as a tapered lock bushing, is a tapered, non-flanged, break up bushing whose tapered sleeve is both screwed or tightened with a socket head cap screw and squeezed on to the shaft so that It is mounted on the shaft. Safeguards a broad range of pulleys, sprockets, flanged hubs, and couplings. These bushings are utilised in pulleys and sprockets to enhance clamping force, although common bore items lock onto the shaft only with a keyway and set screw. All bushings equipped by EP are individually made of high-good quality materials and boxed grub screws.
china price Air Compressor Used Sypt E050-M Sypt Coupling manufacturers
Product Description
air compressor utilised Rexnord E050-M Omega CZPT
Feature
one,Split in half design for simple installation, maintain free
two,High misalignment capacity
three,Facility protection for twirl, twist, impact and abrasion
4,No lubrication for polyurethane flex element
five,Available for bore to size hubs and taper lock bushes
six,Very low noice
Selection
1,Determining the theory torque according to input power and turning speed
two,Determining the operating torque by multiplying service factors, such as operating factor, safety factor, engine factor, temperture factor…
3,Selecting the proper type of coupling which has the valued torque little more than
the operating torque
Installation
1,Mounting one hub to shaft, putting another loose for adjustment of space
2,Putting one half around hubs and securing with cap screws
3,Mouting another half to match the first half element, tighten all cap screws
china Custom 1614983600 Air Compressor Rubber Stainless Steel Coupling Flexible Connector for manufacturers
Item Description
| Item information |
Rubber CZPT s CZPT Steel CZPT Flexible Connector for Air CZPT
Specifications
Place of Origin:
ZheJiang , CZPT (Mainland)
Brand Identify:
omega coupling, CZPT
Design Number:
E50
Kind:
adaptable coupling, CZPT elements
Model:
omega coupling
Class:
Air compressor CZPT
Function:
Link
Size:
Standard for E50
Coloration:
Black / purple / yellow
MOQ:
1 Personal computer for CZPT CZPT
Delivery:
2 to 3 operating working day right after payment
Deal:
Carton for CZPT CZPT
Packaging & Delivery
Packaging Particulars:
Carton for CZPT CZPT
Supply Element:
two to 3 day after payment for CZPT CZPT
omega coupling for screw CZPT rubber coupling alternative omega coupling E50
one. omega coupling for Air CZPT s
two.Prime good quality with realistic price
3.Personlized package
four.OEM offered,A&V Checked
Supply omega coupling for Air CZPT
Functions:
one. omega coupling for Air CZPT s
two.Serious Generation Lines
three.Best top quality with affordable cost
four.Personlized bundle
five.OEM offered,A&V Checked
Characteristic
one,Split in half design for simple installation, maintain free
2,High misalignment capacity
3,Facility protection for twirl, twist, impact and abrasion
4,No lubrication for polyurethane flex element
five,Available for bore to size hubs and taper lock bushes
6,Very low noice
Variety
one,Determining the theory torque according to input power and turning speed
2,Determining the operating torque by multiplying service factors, such as operating factor, safety factor, engine factor, temperture factor…
3,Selecting the proper type of coupling which has the valued torque little more than
the operating torque
Installation
one,Mounting one hub to shaft, putting another loose for adjustment of space
two,Putting one half around hubs and securing with cap screws
three,Mouting another half to match the first half element, tighten all cap screws
| Specification |
screw CZPT CZPT
with higher good quality and minimal price
Materials:Rubber
| Businesss scope |
| CZPT scope | ||
| Mechanical Seal : |
Temperature Sensor | Strain Sensor |
| Servicing Kits | Solenoid Valve | Thermostatic Valve |
| Air intake | Wheel Gear |
Pressure Maintaining Valve |
| Air CZPT | Oil Separator | Oil CZPT |
| Oil Amount Indicator | Circuit Board CZPT Management | Air intake valve |
| Used CZPT | Air-end | Oil amount indicator |
| Packing and shipping |
| Additional info |
| No | Model | Gas displacement m3/min | Power(kw) | |||
| 7.5bar | 8.5/8bar | 10bar | 13bar | |||
| one | GA5P FM | .9 | .eight | .seven | .five | five |
| 2 | GA7P FM | one.2 | 1.1 | one | .eight | 7 |
| three | GA11P FM | 1.seven | 1.6 | 1.5 | one.2 | 11 |
| four | GXe15P FM | two.58 | 2.36 | 2.eighteen | 1.eighty one | fifteen |
| five | GXe18P FM | three.fifteen | three.01 | 2.61 | two.23 | 18 |
| 6 | GXe22P FM | three.61 | 3.5 | 3.one | two.7 | 22 |
| 7 | GAe11P | two | 1.9 | one.six | one.two | 11 |
| eight | GAe15P | two.7 | 2.five | 2.3 | one.nine | 15 |
| 9 | GAe18P | 3.three | 3.1 | two.seven | 2.three | eighteen |
| ten | GAe22P | three.8 | three.7 | three.three | two.8 | 22 |
| 11 | GAe26P | four.3 | 4 | 3.7 | three.1 | 26 |
| twelve | GAe30P | 4.8 | 4.5 | four.3 | 3.seven | thirty |
| thirteen | GA11+P | 2.1 | 2 | one.eight | 1.5 | 11 |
| 14 | GA15+P | two.8 | 2.6 | 2.4 | 2 | 15 |
| 15 | GA18+P | three.5 | 3.three | two.nine | two.five | 18 |
| 16 | GA22+P | 4.one | three.nine | three.five | three | 22 |
| seventeen | GA26+P | 4.8 | 4.six | 4.two | three.six | 26 |
| eighteen | GA30P | five.4 | five.two | 4.eight | four.1 | thirty |
| 19 | GA30+AP | six.1 | 6.(8bar) | four.8 | three.9 | 30 |
| twenty | GA37AP | six.four | 6.3(8bar) | 5.six | 4.five | 37 |
| 21 | GA37+AP | seven.one | 6.9(8bar) | 5.nine | 4.nine | 37 |
| 22 | GA45AP | 7.seven | 7.3(8bar) | 6.five | five.5 | forty five |
| 23 | GA45+AP | eight.six | eight.(8bar) | 7.three | six.one | 45 |
| 24 | GA55AP | ten | nine.3(8bar) | 8.6 | seven.4 | 55 |
| 25 | GA55+(A/W)P | ten.six | 10.1(8bar) | eight.7 | ~~~ | 55 |
| 26 | GA75AP | 13.one | 12.3(8bar) | eleven | 9.7 | 75 |
| 27 | GA75+(A/W)P | fourteen.7 | 13.8(8bar) | 12.two | 10.two | 75 |
| 28 | GA90(A/W)P | 16.2 | 15.6(8bar) | fourteen.1 | 12 | ninety |
| Desk 2 | ||||||
| No | Model | Gas displacement m3/min | Power(kw) | |||
| 7.5bar | 8.5bar | 10bar | 14bar | |||
| 1 | GA90-(W) | 16.eight | 15.8 | fourteen.four | 11.one | 90 |
| two | GA110(W) | 20 | eighteen.eight | seventeen | 13.nine | one hundred ten |
| three | GA132(W) | 24.1 | 22.nine | 21 | 16.eight | 132 |
| 4 | GA160(W) | 30.four | 28.9 | 26.8 | 21.7 | 160 |
| No | Model | Gas displacement m3/min | Power(kw) | |||
| 7.5bar | 8.5bar | 10bar | 13bar | |||
| five | GA200(W) | 36.1 | 34 | 30.seven | 26.one | 200 |
| 6 | GA250(W) | forty three.seven | forty one.seven | 37.8 | 31.7 | 250 |
| 7 | GA315(W) | fifty five | 52 | 48 | 315 | |
| eight | GA355(W) | sixty | 57 | 53 | forty six | 355 |
Conical locking bushings have been rooted in normal and sequence drives as a basic hub-to-hub link. EP gives a complete assortment of push aspects, both standard, and customized. These elements are offered from inventory in regular dimensions 1008 to 5050 and special dimensions 6050 to 10085 for all internal diameters. Reward from our huge merchandise range, substantial storage warehouses, short-phrase availability, and the probability to rapidly create customized goods from one provider.
china near me shop Rubber Joints Stainless Steel Coupling E30 for Air Compressor manufacturers
Product Description
| Solution info |
Rubber CZPT s CZPT Steel CZPT Adaptable Connector for Air CZPT
Specs
Location of Origin:
ZheJiang , CZPT (Mainland)
Brand name Identify:
coupling, CZPT
Product Quantity:
E50
Variety:
versatile coupling, CZPT elements
Manufacturer:
coupling
Group:
Air compressor CZPT
Perform:
Link
Measurement:
Normal for E30
Shade:
Black / purple / yellow
MOQ:
one Pc for CZPT CZPT
Supply:
two to 3 functioning day after payment
Bundle:
Carton for CZPT CZPT
Packaging & Shipping and delivery
Packaging Information:
Carton for CZPT CZPT
Supply Detail:
two to 3 day right after payment for CZPT CZPT
2.Serious Generation Lines
three.Best top quality with realistic cost
4.Personlized bundle
five.OEM offered,A&V Checked
Characteristic
one,Split in half design for simple installation, maintain free
two,High misalignment capacity
three,Facility protection for twirl, twist, impact and abrasion
4,No lubrication for polyurethane flex element
5,Available for bore to size hubs and taper lock bushes
six,Very low noice
Variety
1,Determining the theory torque according to input power and turning speed
2,Determining the operating torque by multiplying service factors, such as operating factor, safety factor, engine factor, temperture factor…
3,Selecting the proper type of coupling which has the valued torque little more than
the operating torque
Installation
one,Mounting one hub to shaft, putting another loose for adjustment of space
2,Putting one half around hubs and securing with cap screws
three,Mouting another half to match the first half element, tighten all cap screws
| Specification |
screw CZPT CZPT
with large quality and lower price
Materials:Rubber
| Businesss scope |
| CZPT scope | ||
| Mechanical Seal : |
Temperature Sensor | Strain Sensor |
| Servicing Kits | Solenoid Valve | Thermostatic Valve |
| Air intake | Wheel Gear |
Pressure Maintaining Valve |
| Air CZPT | Oil Separator | Oil CZPT |
| Oil Level Indicator | Circuit Board CZPT Handle | Air consumption valve |
| Utilized CZPT | Air-stop | Oil level indicator |
| Packing and transport |
| Further information |
| No | Model | Gas displacement m3/min | Power(kw) | |||
| 7.5bar | 8.5/8bar | 10bar | 13bar | |||
| 1 | GA5P FM | .nine | .eight | .7 | .5 | 5 |
| 2 | GA7P FM | 1.2 | 1.one | one | .eight | seven |
| three | GA11P FM | one.seven | 1.six | 1.five | one.two | eleven |
| four | GXe15P FM | two.58 | 2.36 | 2.18 | 1.eighty one | 15 |
| 5 | GXe18P FM | 3.15 | three.01 | 2.sixty one | two.23 | eighteen |
| 6 | GXe22P FM | 3.sixty one | three.5 | three.one | 2.7 | 22 |
| 7 | GAe11P | two | 1.9 | 1.six | one.two | 11 |
| eight | GAe15P | two.7 | 2.five | 2.three | 1.9 | 15 |
| 9 | GAe18P | three.3 | three.one | two.seven | two.three | eighteen |
| ten | GAe22P | 3.eight | three.7 | 3.3 | two.eight | 22 |
| 11 | GAe26P | 4.three | 4 | three.7 | three.1 | 26 |
| 12 | GAe30P | four.8 | four.5 | four.three | three.seven | thirty |
| 13 | GA11+P | two.one | 2 | 1.eight | one.5 | 11 |
| 14 | GA15+P | 2.eight | two.six | 2.four | two | 15 |
| fifteen | GA18+P | 3.five | three.3 | two.9 | 2.five | 18 |
| sixteen | GA22+P | four.1 | three.9 | three.5 | three | 22 |
| 17 | GA26+P | 4.8 | 4.six | 4.2 | three.6 | 26 |
| 18 | GA30P | five.four | 5.2 | 4.8 | four.one | thirty |
| 19 | GA30+AP | 6.1 | six.(8bar) | four.eight | three.nine | thirty |
| twenty | GA37AP | 6.four | 6.3(8bar) | five.six | 4.5 | 37 |
| 21 | GA37+AP | seven.1 | six.9(8bar) | 5.nine | 4.nine | 37 |
| 22 | GA45AP | 7.7 | seven.3(8bar) | 6.five | five.five | 45 |
| 23 | GA45+AP | eight.6 | 8.(8bar) | 7.three | 6.1 | forty five |
| 24 | GA55AP | ten | 9.3(8bar) | 8.six | 7.four | fifty five |
| 25 | GA55+(A/W)P | ten.six | ten.1(8bar) | 8.7 | ~~~ | 55 |
| 26 | GA75AP | 13.1 | 12.3(8bar) | eleven | 9.7 | 75 |
| 27 | GA75+(A/W)P | fourteen.7 | 13.8(8bar) | 12.two | ten.two | 75 |
| 28 | GA90(A/W)P | 16.two | 15.6(8bar) | fourteen.1 | 12 | 90 |
| Table 2 | ||||||
| No | Model | Gas displacement m3/min | Power(kw) | |||
| 7.5bar | 8.5bar | 10bar | 14bar | |||
| one | GA90-(W) | sixteen.eight | fifteen.eight | fourteen.four | 11.one | ninety |
| 2 | GA110(W) | 20 | 18.8 | seventeen | thirteen.9 | a hundred and ten |
| three | GA132(W) | 24.one | 22.nine | 21 | sixteen.eight | 132 |
| four | GA160(W) | 30.four | 28.9 | 26.8 | 21.7 | one hundred sixty |
| No | Model | Gas displacement m3/min | Power(kw) | |||
| 7.5bar | 8.5bar | 10bar | 13bar | |||
| 5 | GA200(W) | 36.1 | 34 | 30.seven | 26.one | 200 |
| six | GA250(W) | 43.7 | forty one.seven | 37.8 | 31.seven | 250 |
| 7 | GA315(W) | fifty five | fifty two | forty eight | 315 | |
| 8 | GA355(W) | 60 | 57 | fifty three | forty six | 355 |
FAQ
one. What is Minimum Get CZPT tity of your CZPT part?
the MOQ is 1pc, require you pay out for the shipping and delivery value.
2. What’s type of your packaging for the CZPT portion?
neutral packing or manufacturer pack as your need
3. Could I get some samples? How could i shell out the sample payment?
of course, we can give sample, but not cost-free.
payment: paypal, westunion ,TT
four. How CZPT is your Shipping and delivery CZPT Time ?
If there is inventory, the guide time is about 2 Functioning Days right after we get the payment, if need to have to be made, it depens.
5. Could you Compute the shipping and delivery value for me?
Sure, we are honored to do that for you! Prior to the freight , you should well allow us know which seaport or airport in close proximity to your place.
6. what is the supply way?
delivery way: air freight, categorical, sea
china factory Screw Air Compressor Flexible Rubber Coupling Element 20r manufacturers
Merchandise Description
| Product details |
Air CZPT Areas 1615678500 CZPT
Requirements
Framework:
Wrapflex
Flexible or Rigid:
Adaptable
Standard or CZPT normal:
Standard
Material:
S45C/1045
Manufacturer Name:
wrapflex coupling
Spot of Origin:
China (Mainland)
Product Variety:
Taper lock 70R-4535 wrapflex coupling
content of hubs:
S45C/1045 steel/GG25
bore kind:
straight bore or taper bore
Taper lock bush:
4535 taper lock bush for wrapflex coupling
Bore measurement:
55-110mm
component substance:
urethane
Software:
Pump technique,compressor,reducer,followers
Certification:
ISO9001:2008,SGS
HS Code:
8483600090
Normal:
Rexnord wrapflex coupling
Packaging & Delivery
Packaging Details:
plywood scenario/personalized package.
Shipping and delivery Element:
2-thirty Days
Wrapflex Elastomeric CZPT s are CZPT lubricated, content-flexing couplings, which are utilised in a range of purposes in numerous industries.
They have exceptional vibration dampening capacity and large-misalignment ability, offering extended daily life to connected gear. The couplings provide a substitute-in-area design and style for rapid installation and substitution.
Feature •
Avoiding impulsive load, large efficient driving and reliable procedure • Put in or eliminate the element radially and eady of routine maintenance for shaft seal
Process of CZPT
Claw variety surface to area design, has the perform of protecting, vibration and shock can produce efficient damping and reduce the running in procedure. Claw variety teeth two sleeve are offset in the circumferential route, in the gap in a quincunx elastic entire body of involute. When little deviations in the installation, the elastic body avoids the stress concentration. Can effectively compensate the axial, radial and angular displacement. Column pin coupling elastomer outdated-fashioned sort of huge quantity, shear influence, straightforward to injury, while the elastic human body new claw kind couplings only under the extrusion pressure, so it can face up to increased load, better put on resistance, CZPT er provider existence. And each the degree of set up, and can be mounted vertical.
Attributes of coupling merchandise:
one, Has the benefits of easy composition, steady efficiency, stable procedure
two, 3 component composition, simple set up and routine maintenance.
3, Hub and elastic entire body, a assortment of resources to select from, to make sure that all can work stably in CZPT environments.
4, Employing a surface matching claw type shaft hub and involute arc elasticity, can avoid the pressure focus, the efficient transmission of greater torque, far more resistant to abrasion, CZPT er service daily life. A little protuberance pad 5 elastic entire body, can isolate the metallic shaft hub contact in coupling mounted, efficient insulation, no need to have of lubrication. CZPT of deviation of the treatment is deformation occurs via the elastic force at the complete.
Functions
one, We can supply CZPT services of het exchangers completely according to CZPT ers’requirement.
2, We can print symbol in accordance to buyers’ requirement.
3, We have been certified by ISO9001:2000 considering that 2004. 4
, We has exported to several international locations, these kinds of as Korea, United states, etc.
| Specification |
screw CZPT CZPT
with higher high quality and minimal price
Material:Rubber
| Businesss scope |
| CZPT scope | ||
| Mechanical Seal : |
Temperature Sensor | Stress Sensor |
| Maintenance Kits | Solenoid Valve | Thermostatic Valve |
| Air consumption | Wheel Equipment |
Pressure Maintaining Valve |
| Air CZPT | Oil Separator | Oil CZPT |
| Oil Stage Indicator | Circuit Board CZPT Control | Air ingestion valve |
| Employed CZPT | Air-end | Oil degree indicator |
| Additional data |
| No | Model | Gas displacement m3/min | Power(kw) | |||
| 7.5bar | 8.5/8bar | 10bar | 13bar | |||
| 1 | GA5P FM | .nine | .8 | .seven | .5 | 5 |
| 2 | GA7P FM | 1.2 | one.1 | 1 | .eight | 7 |
| three | GA11P FM | 1.seven | one.6 | 1.five | 1.two | eleven |
| four | GXe15P FM | two.fifty eight | two.36 | two.18 | 1.81 | 15 |
| five | GXe18P FM | 3.fifteen | three.01 | two.61 | 2.23 | 18 |
| 6 | GXe22P FM | three.sixty one | three.5 | 3.1 | two.7 | 22 |
| seven | GAe11P | two | 1.9 | 1.six | 1.two | 11 |
| 8 | GAe15P | two.seven | two.five | 2.3 | one.9 | fifteen |
| nine | GAe18P | 3.3 | 3.one | two.seven | 2.three | 18 |
| ten | GAe22P | 3.8 | 3.seven | three.three | 2.eight | 22 |
| eleven | GAe26P | four.three | four | 3.seven | 3.one | 26 |
| 12 | GAe30P | four.eight | 4.5 | 4.3 | 3.seven | thirty |
| thirteen | GA11+P | two.1 | two | 1.eight | one.5 | eleven |
| 14 | GA15+P | 2.eight | two.6 | 2.four | two | 15 |
| 15 | GA18+P | 3.5 | 3.three | two.nine | two.5 | 18 |
| 16 | GA22+P | four.one | three.nine | three.five | 3 | 22 |
| seventeen | GA26+P | four.eight | 4.6 | four.2 | three.6 | 26 |
| eighteen | GA30P | five.four | five.2 | 4.8 | 4.1 | thirty |
| 19 | GA30+AP | 6.one | 6.(8bar) | four.8 | 3.9 | 30 |
| 20 | GA37AP | six.four | 6.3(8bar) | 5.six | four.five | 37 |
| 21 | GA37+AP | seven.one | six.9(8bar) | 5.nine | 4.9 | 37 |
| 22 | GA45AP | seven.seven | 7.3(8bar) | 6.5 | five.five | 45 |
| 23 | GA45+AP | eight.six | eight.(8bar) | 7.three | 6.one | forty five |
| 24 | GA55AP | 10 | nine.3(8bar) | 8.six | seven.4 | fifty five |
| twenty five | GA55+(A/W)P | ten.6 | 10.1(8bar) | eight.7 | ~~~ | fifty five |
| 26 | GA75AP | thirteen.1 | twelve.3(8bar) | 11 | nine.7 | seventy five |
| 27 | GA75+(A/W)P | fourteen.7 | 13.8(8bar) | twelve.2 | ten.2 | seventy five |
| 28 | GA90(A/W)P | sixteen.2 | 15.6(8bar) | 14.1 | twelve | ninety |
| Table two | ||||||
| No | Model | Gas displacement m3/min | Power(kw) | |||
| 7.5bar | 8.5bar | 10bar | 14bar | |||
| 1 | GA90-(W) | 16.8 | 15.8 | 14.four | 11.1 | ninety |
| two | GA110(W) | twenty | eighteen.eight | seventeen | thirteen.nine | a hundred and ten |
| three | GA132(W) | 24.1 | 22.9 | 21 | 16.8 | 132 |
| 4 | GA160(W) | 30.4 | 28.nine | 26.8 | 21.7 | one hundred sixty |
| No | Model | Gas displacement m3/min | Power(kw) | |||
| 7.5bar | 8.5bar | 10bar | 13bar | |||
| 5 | GA200(W) | 36.one | 34 | 30.7 | 26.1 | two hundred |
| 6 | GA250(W) | 43.seven | forty one.7 | 37.8 | 31.7 | 250 |
| seven | GA315(W) | fifty five | 52 | forty eight | 315 | |
| 8 | GA355(W) | sixty | fifty seven | fifty three | forty six | 355 |
FAQ
one. What’s Minimum Buy CZPT tity of your CZPT element?
the MOQ is 1pc, need you pay for the shipping and delivery value.
two. What is actually kind of your packaging for the CZPT component?
neutral packing or brand name pack as your prerequisite
three. Could I get some samples? How could i pay out the sample payment?
of course, we can offer sample, but not totally free.
payment: paypal, westunion ,TT
4. How CZPT is your Shipping CZPT Time ?
If there is inventory, the lead time is about 2 Functioning Times following we get the payment, if want to be created, it depens.
five. Could you Compute the delivery value for me?
Yes, we are honored to do that for you! Ahead of the freight , make sure you effectively permit us know which seaport or airport close to your spot.
six. what’s the shipping way?
transport way: air freight, convey, sea
Taper lock bushing dimensions are described by 4 digits symbolizing two figures. The initial two digits signify the optimum bore diameter and the very last two digits depict the bushing length. For example, part number 1008 has a maximum ID of 1.” and an ID size of .8″ inches, with the all round length specified as a whole variety of inches adopted by a fraction. For case in point, a 1.5″ diameter gap would be 1-1/2. Metric hole dimensions are indicated by “MM” right after the metric size (X 25MM). Easy to install and eliminate, these bushings suit on tapered bushing sprockets, or pulley. Bushing touches and wedges inwards, clamping sprocket shaft and bore. Bushing has an 8° taper and is manufactured of metal with a black oxide coating.
china factory Air Compressor Flexible Coupling Ec2, Ec3, Ec4, Ec5, Ec10, Ec20, Ec30, Ec40, Ec50, Ec60, Ec70, Ec80 manufacturers
Product Description
Item Description
OMEGA COUPLING
Attribute
one. Split in fifty percent layout for easy set up, maintain free of charge.
2. CZPT misalignment capacity.
three. Facility security for twirl, twist, effect and abrasion.
four. No lubrication for polyurethane flex factor.
5. Available for bore to measurement hubs and taper lock bushes.
six. Really minimal sounds.
FAQ
Q1: Are you investing business or producer ?
A: We are factory.
Q2: How CZPT is your delivery time and shipment?
1.Sample CZPT -times: 10-20 times.
two.Creation CZPT -moments: thirty-45 days following purchase verified.
Q3: What is your rewards?
one. The most competitive price and excellent top quality.
2. Excellent technical engineers give you the very best assistance.
3. CZPT is CZPT .
china Cheap Screw Air Compressor Parts Gr10-50 Coupling manufacturers
Solution Description
| Product info |
8829571-076 CZPT Air CZPT Elements R10-50 CZPT
Requirements
Construction:
Wrapflex
Adaptable or Rigid:
Flexible
Common or CZPT standard:
Normal
Materials:
S45C/1045
Brand Identify:
wrapflex coupling
Area of Origin:
China (Mainland)
Product Quantity:
Taper lock 70R-4535 wrapflex coupling
content of hubs:
S45C/1045 steel/GG25
bore kind:
straight bore or taper bore
Taper lock bush:
4535 taper lock bush for wrapflex coupling
Bore dimensions:
fifty five-110mm
factor substance:
urethane
Software:
Pump system,compressor,reducer,followers
Certification:
ISO9001:2008,SGS
HS Code:
8483600090
Standard:
Rexnord wrapflex coupling
Packaging & Delivery
Packaging Specifics:
plywood scenario/personalized package deal.
Shipping and delivery Element:
2-30 Days
Wrapflex Elastomeric CZPT s are CZPT lubricated, content-flexing couplings, which are used in a selection of apps in several industries.
They have outstanding vibration dampening capability and higher-misalignment potential, supplying prolonged life to related equipment. The couplings supply a substitute-in-area style for swift installation and substitution.
Feature •
Avoiding impulsive load, large successful driving and trustworthy operation • Install or remove the aspect radially and eady of maintenance for shaft seal
Procedure of CZPT
Claw kind surface area to floor layout, has the operate of guarding, vibration and shock can generate effective damping and decrease the working in process. Claw sort tooth two sleeve are offset in the circumferential route, in the gap in a quincunx elastic body of involute. When tiny deviations in the installation, the elastic human body avoids the anxiety focus. Can effectively compensate the axial, radial and angular displacement. Column pin coupling elastomer previous-fashioned variety of big volume, shear effect, simple to harm, although the elastic entire body new claw variety couplings only underneath the extrusion strain, so it can endure better load, greater use resistance, CZPT er support lifestyle. And each the level of installation, and can be mounted vertical.
Attributes of coupling items:
1, Has the benefits of basic construction, steady functionality, steady procedure
two, A few part composition, straightforward set up and upkeep.
3, Hub and elastic body, a assortment of resources to choose from, to make certain that all can perform stably in CZPT environments.
four, Using a surface matching claw type shaft hub and involute arc elasticity, can stay away from the tension concentration, the efficient transmission of larger torque, much more resistant to abrasion, CZPT er service existence. A tiny protuberance pad 5 elastic physique, can isolate the steel shaft hub speak to in coupling mounted, efficient insulation, no want of lubrication. CZPT of deviation of the remedy is deformation occurs through the elastic pressure at the end.
Attributes
one, We can supply CZPT provider of het exchangers entirely according to CZPT ers’requirement.
2, We can print symbol in accordance to buyers’ necessity.
three, We have been competent by ISO9001:2000 because 2004. 4
, We has exported to several nations, these kinds of as Korea, Usa, and many others.
| Specification |
screw CZPT CZPT
with substantial high quality and reduced price
Materials:Rubber
| Businesss scope |
| CZPT scope | ||
| Mechanical Seal : |
Temperature Sensor | Stress Sensor |
| Servicing Kits | Solenoid Valve | Thermostatic Valve |
| Air consumption | Wheel Equipment |
Pressure Maintaining Valve |
| Air CZPT | Oil Separator | Oil CZPT |
| Oil Stage Indicator | Circuit Board CZPT Management | Air ingestion valve |
| Employed CZPT | Air-finish | Oil level indicator |
| Added information |
| No | Model | Gas displacement m3/min | Power(kw) | |||
| 7.5bar | 8.5/8bar | 10bar | 13bar | |||
| one | GA5P FM | .9 | .8 | .seven | .five | five |
| two | GA7P FM | one.2 | 1.1 | one | .8 | seven |
| 3 | GA11P FM | 1.seven | 1.six | 1.5 | one.two | 11 |
| four | GXe15P FM | 2.fifty eight | two.36 | 2.eighteen | one.eighty one | fifteen |
| five | GXe18P FM | three.fifteen | three.01 | two.61 | two.23 | eighteen |
| 6 | GXe22P FM | three.sixty one | three.five | 3.1 | two.7 | 22 |
| 7 | GAe11P | two | 1.9 | 1.6 | 1.2 | 11 |
| eight | GAe15P | two.seven | two.five | 2.3 | 1.9 | fifteen |
| nine | GAe18P | three.3 | three.1 | 2.7 | 2.3 | eighteen |
| 10 | GAe22P | three.eight | 3.7 | 3.3 | 2.8 | 22 |
| eleven | GAe26P | 4.three | 4 | 3.7 | three.one | 26 |
| twelve | GAe30P | 4.eight | 4.5 | 4.3 | 3.seven | 30 |
| 13 | GA11+P | 2.1 | 2 | 1.eight | 1.5 | eleven |
| fourteen | GA15+P | 2.8 | two.6 | two.4 | 2 | fifteen |
| 15 | GA18+P | 3.5 | 3.3 | two.9 | 2.5 | eighteen |
| 16 | GA22+P | four.1 | three.9 | 3.five | 3 | 22 |
| 17 | GA26+P | four.8 | four.six | 4.two | 3.six | 26 |
| 18 | GA30P | 5.4 | 5.2 | 4.eight | 4.one | thirty |
| 19 | GA30+AP | 6.1 | 6.(8bar) | four.8 | three.nine | 30 |
| twenty | GA37AP | 6.4 | 6.3(8bar) | 5.six | four.5 | 37 |
| 21 | GA37+AP | seven.one | six.9(8bar) | 5.9 | four.nine | 37 |
| 22 | GA45AP | seven.seven | 7.3(8bar) | 6.five | 5.five | 45 |
| 23 | GA45+AP | eight.six | eight.(8bar) | 7.3 | six.one | 45 |
| 24 | GA55AP | ten | nine.3(8bar) | eight.6 | 7.4 | 55 |
| twenty five | GA55+(A/W)P | 10.6 | 10.1(8bar) | eight.seven | ~~~ | fifty five |
| 26 | GA75AP | thirteen.1 | 12.3(8bar) | eleven | 9.seven | 75 |
| 27 | GA75+(A/W)P | 14.seven | 13.8(8bar) | 12.2 | ten.two | 75 |
| 28 | GA90(A/W)P | sixteen.two | fifteen.6(8bar) | fourteen.1 | twelve | 90 |
| Table 2 | ||||||
| No | Model | Gas displacement m3/min | Power(kw) | |||
| 7.5bar | 8.5bar | 10bar | 14bar | |||
| 1 | GA90-(W) | sixteen.8 | fifteen.eight | fourteen.four | eleven.1 | ninety |
| two | GA110(W) | 20 | 18.eight | seventeen | thirteen.nine | a hundred and ten |
| three | GA132(W) | 24.1 | 22.nine | 21 | sixteen.eight | 132 |
| 4 | GA160(W) | thirty.four | 28.9 | 26.eight | 21.seven | a hundred and sixty |
| No | Model | Gas displacement m3/min | Power(kw) | |||
| 7.5bar | 8.5bar | 10bar | 13bar | |||
| 5 | GA200(W) | 36.1 | 34 | thirty.7 | 26.1 | 200 |
| six | GA250(W) | forty three.seven | forty one.7 | 37.8 | 31.seven | 250 |
| 7 | GA315(W) | 55 | fifty two | 48 | 315 | |
| 8 | GA355(W) | 60 | fifty seven | 53 | forty six | 355 |
china Cost Air Compressor Rubber Joints Stainless Steel Coupling Flexible Connector for manufacturers
Merchandise Description
| Solution details |
Rubber CZPT s CZPT Steel CZPT Versatile Connector for Air CZPT
Technical specs
Location of Origin:
ZheJiang , CZPT (Mainland)
Brand name Name:
omega coupling, CZPT
Product Quantity:
E50
Kind:
adaptable coupling, CZPT parts
Manufacturer:
omega coupling
Classification:
Air compressor CZPT
Operate:
Connection
Dimensions:
Normal for E50
Coloration:
Black / purple / yellow
MOQ:
one Computer for CZPT CZPT
Shipping:
2 to 3 working day soon after payment
Deal:
Carton for CZPT CZPT
Packaging & Shipping
Packaging Information:
Carton for CZPT CZPT
Shipping Depth:
two to 3 working day soon after payment for CZPT CZPT
omega coupling for screw CZPT rubber coupling replacement omega coupling E50
one. omega coupling for Air CZPT s
2.Top quality with sensible price
3.Personlized package
4.OEM supplied,A&V Checked
Supply omega coupling for Air CZPT
Attributes:
1. omega coupling for Air CZPT s
2.Serious Generation Lines
three.Prime high quality with sensible price tag
four.Personlized deal
five.OEM presented,A&V Checked
Attribute
one,Split in half design for simple installation, maintain free
2,High misalignment capacity
three,Facility protection for twirl, twist, impact and abrasion
4,No lubrication for polyurethane flex element
5,Available for bore to size hubs and taper lock bushes
six,Very low noice
Selection
1,Determining the theory torque according to input power and turning speed
two,Determining the operating torque by multiplying service factors, such as operating factor, safety factor, engine factor, temperture factor…
3,Selecting the proper type of coupling which has the valued torque little more than
the operating torque
Installation
one,Mounting one hub to shaft, putting another loose for adjustment of space
2,Putting one half around hubs and securing with cap screws
3,Mouting another half to match the first half element, tighten all cap screws
| Specification |
screw CZPT CZPT
with substantial top quality and reduced price
Materials:Rubber
| Businesss scope |
| CZPT scope | ||
| Mechanical Seal : |
Temperature Sensor | Strain Sensor |
| Routine maintenance Kits | Solenoid Valve | Thermostatic Valve |
| Air intake | Wheel Equipment |
Strain Maintaining Valve |
| Air CZPT | Oil Separator | Oil CZPT |
| Oil Level Indicator | Circuit Board CZPT Control | Air consumption valve |
| Utilised CZPT | Air-conclude | Oil level indicator |
| Packing and shipping and delivery |
| Further details |
| No | Model | Gas displacement m3/min | Power(kw) | |||
| 7.5bar | 8.5/8bar | 10bar | 13bar | |||
| one | GA5P FM | .9 | .8 | .seven | .5 | five |
| 2 | GA7P FM | 1.two | one.1 | 1 | .eight | seven |
| 3 | GA11P FM | one.7 | 1.6 | one.5 | one.2 | 11 |
| 4 | GXe15P FM | two.fifty eight | two.36 | two.eighteen | 1.81 | 15 |
| five | GXe18P FM | three.fifteen | three.01 | two.61 | two.23 | 18 |
| six | GXe22P FM | 3.61 | 3.five | three.one | 2.seven | 22 |
| seven | GAe11P | two | 1.9 | 1.6 | one.2 | eleven |
| 8 | GAe15P | two.7 | two.five | 2.3 | 1.nine | 15 |
| nine | GAe18P | 3.three | three.one | 2.seven | 2.3 | 18 |
| 10 | GAe22P | three.eight | 3.7 | three.three | 2.8 | 22 |
| eleven | GAe26P | four.three | 4 | three.seven | 3.one | 26 |
| twelve | GAe30P | 4.8 | four.five | 4.three | 3.seven | thirty |
| thirteen | GA11+P | 2.one | two | one.8 | one.five | eleven |
| fourteen | GA15+P | 2.8 | 2.6 | 2.four | 2 | 15 |
| 15 | GA18+P | 3.5 | three.three | 2.9 | two.5 | eighteen |
| 16 | GA22+P | four.one | 3.nine | 3.5 | three | 22 |
| seventeen | GA26+P | four.eight | four.six | 4.2 | three.six | 26 |
| 18 | GA30P | five.4 | 5.2 | four.eight | 4.1 | thirty |
| 19 | GA30+AP | six.1 | six.(8bar) | 4.eight | 3.nine | 30 |
| 20 | GA37AP | six.four | six.3(8bar) | 5.6 | 4.five | 37 |
| 21 | GA37+AP | seven.1 | six.9(8bar) | 5.9 | four.nine | 37 |
| 22 | GA45AP | 7.seven | seven.3(8bar) | 6.five | five.five | 45 |
| 23 | GA45+AP | 8.six | eight.(8bar) | 7.three | 6.1 | forty five |
| 24 | GA55AP | ten | nine.3(8bar) | 8.six | 7.4 | fifty five |
| 25 | GA55+(A/W)P | 10.6 | 10.1(8bar) | 8.7 | ~~~ | fifty five |
| 26 | GA75AP | thirteen.one | 12.3(8bar) | eleven | 9.seven | 75 |
| 27 | GA75+(A/W)P | 14.7 | thirteen.8(8bar) | twelve.2 | ten.two | seventy five |
| 28 | GA90(A/W)P | 16.2 | fifteen.6(8bar) | 14.1 | 12 | ninety |
| Table two | ||||||
| No | Model | Gas displacement m3/min | Power(kw) | |||
| 7.5bar | 8.5bar | 10bar | 14bar | |||
| one | GA90-(W) | 16.8 | fifteen.8 | fourteen.4 | eleven.1 | 90 |
| 2 | GA110(W) | twenty | eighteen.8 | seventeen | thirteen.9 | a hundred and ten |
| 3 | GA132(W) | 24.one | 22.9 | 21 | sixteen.eight | 132 |
| 4 | GA160(W) | 30.4 | 28.9 | 26.8 | 21.7 | a hundred and sixty |
| No | Model | Gas displacement m3/min | Power(kw) | |||
| 7.5bar | 8.5bar | 10bar | 13bar | |||
| 5 | GA200(W) | 36.1 | 34 | 30.seven | 26.1 | 200 |
| six | GA250(W) | 43.7 | forty one.seven | 37.8 | 31.seven | 250 |
| seven | GA315(W) | 55 | fifty two | forty eight | 315 | |
| 8 | GA355(W) | 60 | fifty seven | 53 | 46 | 355 |
FAQ
one. What is actually Minimal Buy CZPT tity of your CZPT portion?
the MOQ is 1pc, require you shell out for the shipping value.
two. What is actually kind of your packaging for the CZPT portion?
neutral packing or model pack as your need
three. Could I get some samples? How could i pay the sample payment?
sure, we can give sample, but not totally free.
payment: paypal, westunion ,TT
4. How CZPT is your Shipping and delivery CZPT Time ?
If there is inventory, the lead time is about 2 Working Days right after we get the payment, if want to be made, it depens.
5. Could you Determine the shipping and delivery price for me?
Sure, we are honored to do that for you! Just before the freight , please well permit us know which seaport or airport around your location.
6. what is actually the shipping way?
delivery way: air freight, specific, sea