Product Description
Chinese Manufacturer Tapered locking Cast iron bushing for large compressor belt tensioner pulley Taper Lock Bush
install
1. Clean the shaft, bushing hole, bushing outside, and components (sprocket, pulley,
Etc.).
2. Insert the bushing into the assembly. Match hole patterns, not threaded holes (each hole is threaded on 1 side only).
3. Screw the set screw or cap screw into the half-threaded hole as shown in the figure below. Install the assembly CHINAMFG the shaft.
4. Replace the torque setting or cap screw with the recommended torque setting in the following table.
5. Fill all unoccupied holes with grease.
Company Information
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Type: | Agricultural |
---|---|
Usage: | Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying |
Material: | Stainless Steel |
Power Source: | Electricity |
Weight: | 6kg |
After-sales Service: | Installation Guide 3-Year Warranty |
Customization: |
Available
| Customized Request |
---|
What are the temperature and environmental considerations when using taper lock bushings?
When using taper lock bushings, it is important to consider the temperature and environmental conditions in which the bushings will operate. These factors can have a significant impact on the performance, durability, and overall effectiveness of the bushings. Here are some key considerations:
- Temperature Range: Taper lock bushings are typically designed to operate within specific temperature ranges. Exceeding these temperature limits can result in reduced performance, increased wear, or even failure of the bushings. It is crucial to consult the manufacturer’s specifications and guidelines to ensure that the bushings are suitable for the anticipated temperature range in your application. Extreme temperatures, whether hot or cold, can affect the material properties, dimensional stability, and lubrication characteristics of the bushings.
- Corrosive Environments: In environments where corrosive substances are present, such as chemicals, moisture, or saltwater, special considerations must be taken. Corrosion can deteriorate the surface finish and structural integrity of the taper lock bushings, leading to premature failure. It is important to select bushings that are made from materials resistant to corrosion, such as stainless steel or corrosion-resistant coatings. Regular inspection, cleaning, and proper maintenance can also help mitigate the effects of corrosive environments.
- Dust, Dirt, and Contaminants: Taper lock bushings operating in dusty or dirty environments can be prone to accelerated wear and decreased performance. Dust, dirt, and other contaminants can infiltrate the bushing interface, impairing the locking mechanism or causing excessive friction. Regular cleaning, protective covers or guards, and appropriate sealing measures can help minimize the effects of contaminants on the bushings.
- Moisture and Humidity: Moisture and high humidity levels can promote corrosion, rust, or the formation of oxidation on the surface of taper lock bushings. This can lead to increased friction, reduced locking efficiency, and potential damage to the bushings. Using moisture-resistant materials, applying protective coatings, and ensuring proper lubrication can help mitigate the negative effects of moisture and humidity.
- Shock and Vibration: Taper lock bushings may be subjected to shock and vibration in certain applications. Excessive shock and vibration can lead to loosening of the bushings, misalignment, or even complete disengagement from the shaft. It is important to consider the magnitude and frequency of shock and vibration in the operating environment and select bushings that are designed to withstand such conditions. Additional measures such as using locking compounds, thread-locking adhesives, or anti-vibration mounts can enhance the stability and reliability of the bushings.
Understanding and addressing these temperature and environmental considerations can help ensure optimal performance and longevity of taper lock bushings in your specific application. It is recommended to consult the manufacturer’s guidelines, industry standards, and experts in the field to determine the most suitable bushings and maintenance practices for your operating conditions.
Can I get recommendations for taper lock bushings with anti-corrosion properties?
Yes, you can receive recommendations for taper lock bushings with anti-corrosion properties. When corrosion resistance is a crucial requirement for your application, selecting the right material and coating for the bushings is essential. Here are some recommendations for taper lock bushings with anti-corrosion properties:
- Stainless Steel Bushings: Stainless steel bushings are an excellent choice for applications requiring corrosion resistance. Stainless steel contains chromium, which forms a protective oxide layer on the surface, providing resistance against rust, oxidation, and other forms of corrosion. Look for taper lock bushings made from high-quality stainless steel, such as 304 or 316 grades, which offer enhanced corrosion resistance.
- Plated or Coated Bushings: Another option is to select taper lock bushings that are plated or coated with anti-corrosion materials. These coatings provide an additional layer of protection to the underlying material. Some common coating options include zinc plating, nickel plating, or various polymer coatings. These coatings act as a barrier against moisture, chemicals, and other corrosive elements, extending the lifespan of the bushings.
- Polymer Bushings: Certain polymer materials, such as nylon or PTFE (polytetrafluoroethylene), exhibit excellent resistance to corrosion. These polymer bushings are inherently non-metallic and do not require additional coatings. They are particularly suitable for applications where the presence of moisture, chemicals, or other corrosive substances is a concern. Polymer bushings also offer advantages such as low friction and self-lubrication.
- Specialized Coatings: In some cases, specialized coatings or treatments may be available for taper lock bushings to enhance their corrosion resistance. For instance, bushings may undergo processes like passivation or chemical treatments to improve their resistance to specific corrosive agents. These specialized options can be explored based on the specific requirements of your application and the recommendations provided by bushing manufacturers.
When selecting taper lock bushings with anti-corrosion properties, it is important to consider factors such as the operating environment, exposure to chemicals or moisture, temperature range, and the compatibility of the bushing material with other components in the system. Manufacturers and suppliers of taper lock bushings can provide guidance on the most suitable options for your specific application.
By choosing taper lock bushings with anti-corrosion properties, you can ensure the longevity and reliability of your power transmission system, even in environments where corrosion is a concern.
What are the advantages of using taper lock bushings in power transmission systems?
Taper lock bushings offer several advantages when used in power transmission systems. These advantages contribute to their widespread adoption and popularity in various industrial applications. Here are some key advantages:
- Ease of Installation: Taper lock bushings are designed for easy and straightforward installation. They can be quickly mounted on the shaft without the need for extensive disassembly or specialized tools. This ease of installation reduces downtime during equipment assembly or maintenance, saving valuable time and labor costs.
- Secure Shaft Connection: Taper lock bushings provide a secure and reliable connection between the shaft and the driven component. Their tapered design ensures a tight fit and eliminates slippage or movement between the two components. This secure connection allows for efficient power transmission, minimizing energy loss and maximizing system performance.
- Versatility: Taper lock bushings are available in a wide range of sizes to accommodate different shaft diameters. This versatility makes them suitable for various applications across different industries. Whether you have fractional inch shafts or metric measurements, you can find taper lock bushings that fit your specific requirements.
- Interchangeability: Taper lock bushings are designed to be interchangeable, meaning they can be easily replaced or swapped out when needed. This interchangeability simplifies maintenance and repairs, as a damaged or worn-out bushing can be replaced without replacing the entire shaft or driven component. It also provides flexibility in adapting power transmission systems to changing needs or requirements.
- High Torque Transmission: Taper lock bushings are capable of transmitting high torque loads between the shaft and the driven component. Their secure grip and uniform distribution of forces allow for efficient power transmission, even in demanding applications with substantial torque requirements.
- Cost-Effectiveness: Taper lock bushings offer a cost-effective solution for power transmission systems. They are generally more affordable compared to alternative methods of shaft connection, such as keyway and set screw arrangements. Additionally, their ease of installation and interchangeability contribute to reduced maintenance and replacement costs over time.
- Wide Compatibility: Taper lock bushings can be used with various types of driven components, including pulleys, sprockets, gears, and couplings. This wide compatibility allows for versatile application in different power transmission systems, making them a versatile choice for many industries.
Overall, taper lock bushings offer a combination of ease of installation, secure connection, versatility, and cost-effectiveness, making them a popular choice for power transmission systems. Their advantages contribute to improved system performance, reduced downtime, and increased operational efficiency in industrial applications.
editor by CX 2024-04-23
china shop Cast Iron V Groove Belt Pulleys for Air Compressor manufacturers
Solution Description
Cast Iron V Groove Belt Pulleys for Air CZPT
Item | Bore Variety | Type |
European Standard V Belt Pulley |
TB Bore & |
SPA |
SPB | ||
SPC | ||
SPZ | ||
Poly V Pulleys (Inch & Metric) |
TB Bore & Pilot Bore |
J3, J4, J5, J6, J8, J12, J16, J20 |
L5, L6, L8, L10, L12, L16, L20 | ||
M6, M10, M16, M20 | ||
Adjustable Pulleys | TB Bore | Z1, A1, A2, B1, B2 |
American Normal Sheaves | STB & QD & TB Bushed | AK/AKH, BK/BKH, TA/TB/TC, B/C/D, 3V/5V/8V |
Split Pulleys | Fixed Bore | PM |
P.M Hubs | V/W | |
AS/BS Series Sheaves | AS/BS | |
Ok/OL/AL Collection Sheaves | Ok/OL/AL/AM | |
Variable Sequence Sheaves | VP/VL/VM |
Principal Merchandise:
1. Timing Belt Pulley (Synchronous Pulley), Timing Bar, Clamping Plate
2. Forging, Casting, Stampling Part
three. V Belt Pulley and Taper Lock Bush Sprocket, Idler and Plate WheelSpur Gear, Bevel Gear, Rack
four. Shaft Locking Device: could be alternative for Ringfeder, Sati, Chiaravalli, Tollok, etc.
5. Shaft Coupling: including Miniature couplings, Curved tooth coupling, Chain coupling, HRC coupling,
Normex coupling, Type coupling, GE Coupling, torque limiter, Universal Joint
six. Shaft Collars: including Setscrew Type, Single Split and Double Splits
seven. Gear & Rack: Spur equipment/rack, bevel gear, CZPT cal equipment/rack.
8. CZPT customized Machining Parts according to drawings (OEM) Forging, Casting, Stamping Parts.
Packaging & CZPT :
All the products can be packed in cartons,or,you can choose the pallet packing.
MADE IN CHINA can be pressed on wooden cases.Land,air,sea transportation are available.UPS,DHL,TNT,
FedEx and EMS are all supported.
Company Introduction:
Manufacturing facility See:
Exhibition:
FAQ:
one. MOQ
A: Generally, 1 computer for common elements speak to for CZPT normal elements.
2. Delivery Time
A: In stock: inside 5 functioning times. Out of stock: is dependent on your get amount.
3. How To Decide on
A: element variety or drawing, catalogue. If no, you can send us your sample, so we can make the drawing and sample accordingly.
four: What is the Warranty for your items?
A:Typically CZPT warranty is 1 calendar year.
Contacts:
A tapered bushing, also identified as a tapered lock bushing, is a tapered, non-flanged, break up bushing whose tapered sleeve is both screwed or tightened with a socket head cap screw and squeezed on to the shaft so that It is mounted on the shaft. Safeguards a broad range of pulleys, sprockets, flanged hubs, and couplings. These bushings are utilised in pulleys and sprockets to enhance clamping force, although common bore items lock onto the shaft only with a keyway and set screw. All bushings equipped by EP are individually made of high-good quality materials and boxed grub screws.
china Custom 1614983600 Air Compressor Rubber Stainless Steel Coupling Flexible Connector for manufacturers
Item Description
Item information |
Rubber CZPT s CZPT Steel CZPT Flexible Connector for Air CZPT
Specifications
Place of Origin:
ZheJiang , CZPT (Mainland)
Brand Identify:
omega coupling, CZPT
Design Number:
E50
Kind:
adaptable coupling, CZPT elements
Model:
omega coupling
Class:
Air compressor CZPT
Function:
Link
Size:
Standard for E50
Coloration:
Black / purple / yellow
MOQ:
1 Personal computer for CZPT CZPT
Delivery:
2 to 3 operating working day right after payment
Deal:
Carton for CZPT CZPT
Packaging & Delivery
Packaging Particulars:
Carton for CZPT CZPT
Supply Element:
two to 3 day after payment for CZPT CZPT
omega coupling for screw CZPT rubber coupling alternative omega coupling E50
one. omega coupling for Air CZPT s
two.Prime good quality with realistic price
3.Personlized package
four.OEM offered,A&V Checked
Supply omega coupling for Air CZPT
Functions:
one. omega coupling for Air CZPT s
two.Serious Generation Lines
three.Best top quality with affordable cost
four.Personlized bundle
five.OEM offered,A&V Checked
Characteristic
one,Split in half design for simple installation, maintain free
2,High misalignment capacity
3,Facility protection for twirl, twist, impact and abrasion
4,No lubrication for polyurethane flex element
five,Available for bore to size hubs and taper lock bushes
6,Very low noice
Variety
one,Determining the theory torque according to input power and turning speed
2,Determining the operating torque by multiplying service factors, such as operating factor, safety factor, engine factor, temperture factor…
3,Selecting the proper type of coupling which has the valued torque little more than
the operating torque
Installation
one,Mounting one hub to shaft, putting another loose for adjustment of space
two,Putting one half around hubs and securing with cap screws
three,Mouting another half to match the first half element, tighten all cap screws
Specification |
screw CZPT CZPT
with higher good quality and minimal price
Materials:Rubber
Businesss scope |
CZPT scope | ||
Mechanical Seal : |
Temperature Sensor | Strain Sensor |
Servicing Kits | Solenoid Valve | Thermostatic Valve |
Air intake | Wheel Gear |
Pressure Maintaining Valve |
Air CZPT | Oil Separator | Oil CZPT |
Oil Amount Indicator | Circuit Board CZPT Management | Air intake valve |
Used CZPT | Air-end | Oil amount indicator |
Packing and shipping |
Additional info |
No | Model | Gas displacement m3/min | Power(kw) | |||
7.5bar | 8.5/8bar | 10bar | 13bar | |||
one | GA5P FM | .9 | .eight | .seven | .five | five |
2 | GA7P FM | one.2 | 1.1 | one | .eight | 7 |
three | GA11P FM | 1.seven | 1.6 | 1.5 | one.2 | 11 |
four | GXe15P FM | two.58 | 2.36 | 2.eighteen | 1.eighty one | fifteen |
five | GXe18P FM | three.fifteen | three.01 | 2.61 | two.23 | 18 |
6 | GXe22P FM | three.61 | 3.5 | 3.one | two.7 | 22 |
7 | GAe11P | two | 1.9 | one.six | one.two | 11 |
eight | GAe15P | two.7 | 2.five | 2.3 | one.nine | 15 |
9 | GAe18P | 3.three | 3.1 | two.seven | 2.three | eighteen |
ten | GAe22P | three.8 | three.7 | three.three | two.8 | 22 |
11 | GAe26P | four.3 | 4 | 3.7 | three.1 | 26 |
twelve | GAe30P | 4.8 | 4.5 | four.3 | 3.seven | thirty |
thirteen | GA11+P | 2.1 | 2 | one.eight | 1.5 | 11 |
14 | GA15+P | two.8 | 2.6 | 2.4 | 2 | 15 |
15 | GA18+P | three.5 | 3.three | two.nine | two.five | 18 |
16 | GA22+P | 4.one | three.nine | three.five | three | 22 |
seventeen | GA26+P | 4.8 | 4.six | 4.two | three.six | 26 |
eighteen | GA30P | five.4 | five.two | 4.eight | four.1 | thirty |
19 | GA30+AP | six.1 | 6.(8bar) | four.8 | three.9 | 30 |
twenty | GA37AP | six.four | 6.3(8bar) | 5.six | 4.five | 37 |
21 | GA37+AP | seven.one | 6.9(8bar) | 5.nine | 4.nine | 37 |
22 | GA45AP | 7.seven | 7.3(8bar) | 6.five | five.5 | forty five |
23 | GA45+AP | eight.six | eight.(8bar) | 7.three | six.one | 45 |
24 | GA55AP | ten | nine.3(8bar) | 8.6 | seven.4 | 55 |
25 | GA55+(A/W)P | ten.six | 10.1(8bar) | eight.7 | ~~~ | 55 |
26 | GA75AP | 13.one | 12.3(8bar) | eleven | 9.7 | 75 |
27 | GA75+(A/W)P | fourteen.7 | 13.8(8bar) | 12.two | 10.two | 75 |
28 | GA90(A/W)P | 16.2 | 15.6(8bar) | fourteen.1 | 12 | ninety |
Desk 2 | ||||||
No | Model | Gas displacement m3/min | Power(kw) | |||
7.5bar | 8.5bar | 10bar | 14bar | |||
1 | GA90-(W) | 16.eight | 15.8 | fourteen.four | 11.one | 90 |
two | GA110(W) | 20 | eighteen.eight | seventeen | 13.nine | one hundred ten |
three | GA132(W) | 24.1 | 22.nine | 21 | 16.eight | 132 |
4 | GA160(W) | 30.four | 28.9 | 26.8 | 21.7 | 160 |
No | Model | Gas displacement m3/min | Power(kw) | |||
7.5bar | 8.5bar | 10bar | 13bar | |||
five | GA200(W) | 36.1 | 34 | 30.seven | 26.one | 200 |
6 | GA250(W) | forty three.seven | forty one.seven | 37.8 | 31.7 | 250 |
7 | GA315(W) | fifty five | 52 | 48 | 315 | |
eight | GA355(W) | sixty | 57 | 53 | forty six | 355 |
Conical locking bushings have been rooted in normal and sequence drives as a basic hub-to-hub link. EP gives a complete assortment of push aspects, both standard, and customized. These elements are offered from inventory in regular dimensions 1008 to 5050 and special dimensions 6050 to 10085 for all internal diameters. Reward from our huge merchandise range, substantial storage warehouses, short-phrase availability, and the probability to rapidly create customized goods from one provider.
china near me shop Rubber Joints Stainless Steel Coupling E30 for Air Compressor manufacturers
Product Description
Solution info |
Rubber CZPT s CZPT Steel CZPT Adaptable Connector for Air CZPT
Specs
Location of Origin:
ZheJiang , CZPT (Mainland)
Brand name Identify:
coupling, CZPT
Product Quantity:
E50
Variety:
versatile coupling, CZPT elements
Manufacturer:
coupling
Group:
Air compressor CZPT
Perform:
Link
Measurement:
Normal for E30
Shade:
Black / purple / yellow
MOQ:
one Pc for CZPT CZPT
Supply:
two to 3 functioning day after payment
Bundle:
Carton for CZPT CZPT
Packaging & Shipping and delivery
Packaging Information:
Carton for CZPT CZPT
Supply Detail:
two to 3 day right after payment for CZPT CZPT
2.Serious Generation Lines
three.Best top quality with realistic cost
4.Personlized bundle
five.OEM offered,A&V Checked
Characteristic
one,Split in half design for simple installation, maintain free
two,High misalignment capacity
three,Facility protection for twirl, twist, impact and abrasion
4,No lubrication for polyurethane flex element
5,Available for bore to size hubs and taper lock bushes
six,Very low noice
Variety
1,Determining the theory torque according to input power and turning speed
2,Determining the operating torque by multiplying service factors, such as operating factor, safety factor, engine factor, temperture factor…
3,Selecting the proper type of coupling which has the valued torque little more than
the operating torque
Installation
one,Mounting one hub to shaft, putting another loose for adjustment of space
2,Putting one half around hubs and securing with cap screws
three,Mouting another half to match the first half element, tighten all cap screws
Specification |
screw CZPT CZPT
with large quality and lower price
Materials:Rubber
Businesss scope |
CZPT scope | ||
Mechanical Seal : |
Temperature Sensor | Strain Sensor |
Servicing Kits | Solenoid Valve | Thermostatic Valve |
Air intake | Wheel Gear |
Pressure Maintaining Valve |
Air CZPT | Oil Separator | Oil CZPT |
Oil Level Indicator | Circuit Board CZPT Handle | Air consumption valve |
Utilized CZPT | Air-stop | Oil level indicator |
Packing and transport |
Further information |
No | Model | Gas displacement m3/min | Power(kw) | |||
7.5bar | 8.5/8bar | 10bar | 13bar | |||
1 | GA5P FM | .nine | .eight | .7 | .5 | 5 |
2 | GA7P FM | 1.2 | 1.one | one | .eight | seven |
three | GA11P FM | one.seven | 1.six | 1.five | one.two | eleven |
four | GXe15P FM | two.58 | 2.36 | 2.18 | 1.eighty one | 15 |
5 | GXe18P FM | 3.15 | three.01 | 2.sixty one | two.23 | eighteen |
6 | GXe22P FM | 3.sixty one | three.5 | three.one | 2.7 | 22 |
7 | GAe11P | two | 1.9 | 1.six | one.two | 11 |
eight | GAe15P | two.7 | 2.five | 2.three | 1.9 | 15 |
9 | GAe18P | three.3 | three.one | two.seven | two.three | eighteen |
ten | GAe22P | 3.eight | three.7 | 3.3 | two.eight | 22 |
11 | GAe26P | 4.three | 4 | three.7 | three.1 | 26 |
12 | GAe30P | four.8 | four.5 | four.three | three.seven | thirty |
13 | GA11+P | two.one | 2 | 1.eight | one.5 | 11 |
14 | GA15+P | 2.eight | two.six | 2.four | two | 15 |
fifteen | GA18+P | 3.five | three.3 | two.9 | 2.five | 18 |
sixteen | GA22+P | four.1 | three.9 | three.5 | three | 22 |
17 | GA26+P | 4.8 | 4.six | 4.2 | three.6 | 26 |
18 | GA30P | five.four | 5.2 | 4.8 | four.one | thirty |
19 | GA30+AP | 6.1 | six.(8bar) | four.eight | three.nine | thirty |
twenty | GA37AP | 6.four | 6.3(8bar) | five.six | 4.5 | 37 |
21 | GA37+AP | seven.1 | six.9(8bar) | 5.nine | 4.nine | 37 |
22 | GA45AP | 7.7 | seven.3(8bar) | 6.five | five.five | 45 |
23 | GA45+AP | eight.6 | 8.(8bar) | 7.three | 6.1 | forty five |
24 | GA55AP | ten | 9.3(8bar) | 8.six | 7.four | fifty five |
25 | GA55+(A/W)P | ten.six | ten.1(8bar) | 8.7 | ~~~ | 55 |
26 | GA75AP | 13.1 | 12.3(8bar) | eleven | 9.7 | 75 |
27 | GA75+(A/W)P | fourteen.7 | 13.8(8bar) | 12.two | ten.two | 75 |
28 | GA90(A/W)P | 16.two | 15.6(8bar) | fourteen.1 | 12 | 90 |
Table 2 | ||||||
No | Model | Gas displacement m3/min | Power(kw) | |||
7.5bar | 8.5bar | 10bar | 14bar | |||
one | GA90-(W) | sixteen.eight | fifteen.eight | fourteen.four | 11.one | ninety |
2 | GA110(W) | 20 | 18.8 | seventeen | thirteen.9 | a hundred and ten |
three | GA132(W) | 24.one | 22.nine | 21 | sixteen.eight | 132 |
four | GA160(W) | 30.four | 28.9 | 26.8 | 21.7 | one hundred sixty |
No | Model | Gas displacement m3/min | Power(kw) | |||
7.5bar | 8.5bar | 10bar | 13bar | |||
5 | GA200(W) | 36.1 | 34 | 30.seven | 26.one | 200 |
six | GA250(W) | 43.7 | forty one.seven | 37.8 | 31.seven | 250 |
7 | GA315(W) | fifty five | fifty two | forty eight | 315 | |
8 | GA355(W) | 60 | 57 | fifty three | forty six | 355 |
FAQ
one. What is Minimum Get CZPT tity of your CZPT part?
the MOQ is 1pc, require you pay out for the shipping and delivery value.
2. What’s type of your packaging for the CZPT portion?
neutral packing or manufacturer pack as your need
3. Could I get some samples? How could i shell out the sample payment?
of course, we can give sample, but not cost-free.
payment: paypal, westunion ,TT
four. How CZPT is your Shipping and delivery CZPT Time ?
If there is inventory, the guide time is about 2 Functioning Days right after we get the payment, if need to have to be made, it depens.
5. Could you Compute the shipping and delivery value for me?
Sure, we are honored to do that for you! Prior to the freight , you should well allow us know which seaport or airport in close proximity to your place.
6. what is the supply way?
delivery way: air freight, categorical, sea
china Cost Air Compressor Rubber Joints Stainless Steel Coupling Flexible Connector for manufacturers
Merchandise Description
Solution details |
Rubber CZPT s CZPT Steel CZPT Versatile Connector for Air CZPT
Technical specs
Location of Origin:
ZheJiang , CZPT (Mainland)
Brand name Name:
omega coupling, CZPT
Product Quantity:
E50
Kind:
adaptable coupling, CZPT parts
Manufacturer:
omega coupling
Classification:
Air compressor CZPT
Operate:
Connection
Dimensions:
Normal for E50
Coloration:
Black / purple / yellow
MOQ:
one Computer for CZPT CZPT
Shipping:
2 to 3 working day soon after payment
Deal:
Carton for CZPT CZPT
Packaging & Shipping
Packaging Information:
Carton for CZPT CZPT
Shipping Depth:
two to 3 working day soon after payment for CZPT CZPT
omega coupling for screw CZPT rubber coupling replacement omega coupling E50
one. omega coupling for Air CZPT s
2.Top quality with sensible price
3.Personlized package
4.OEM supplied,A&V Checked
Supply omega coupling for Air CZPT
Attributes:
1. omega coupling for Air CZPT s
2.Serious Generation Lines
three.Prime high quality with sensible price tag
four.Personlized deal
five.OEM presented,A&V Checked
Attribute
one,Split in half design for simple installation, maintain free
2,High misalignment capacity
three,Facility protection for twirl, twist, impact and abrasion
4,No lubrication for polyurethane flex element
5,Available for bore to size hubs and taper lock bushes
six,Very low noice
Selection
1,Determining the theory torque according to input power and turning speed
two,Determining the operating torque by multiplying service factors, such as operating factor, safety factor, engine factor, temperture factor…
3,Selecting the proper type of coupling which has the valued torque little more than
the operating torque
Installation
one,Mounting one hub to shaft, putting another loose for adjustment of space
2,Putting one half around hubs and securing with cap screws
3,Mouting another half to match the first half element, tighten all cap screws
Specification |
screw CZPT CZPT
with substantial top quality and reduced price
Materials:Rubber
Businesss scope |
CZPT scope | ||
Mechanical Seal : |
Temperature Sensor | Strain Sensor |
Routine maintenance Kits | Solenoid Valve | Thermostatic Valve |
Air intake | Wheel Equipment |
Strain Maintaining Valve |
Air CZPT | Oil Separator | Oil CZPT |
Oil Level Indicator | Circuit Board CZPT Control | Air consumption valve |
Utilised CZPT | Air-conclude | Oil level indicator |
Packing and shipping and delivery |
Further details |
No | Model | Gas displacement m3/min | Power(kw) | |||
7.5bar | 8.5/8bar | 10bar | 13bar | |||
one | GA5P FM | .9 | .8 | .seven | .5 | five |
2 | GA7P FM | 1.two | one.1 | 1 | .eight | seven |
3 | GA11P FM | one.7 | 1.6 | one.5 | one.2 | 11 |
4 | GXe15P FM | two.fifty eight | two.36 | two.eighteen | 1.81 | 15 |
five | GXe18P FM | three.fifteen | three.01 | two.61 | two.23 | 18 |
six | GXe22P FM | 3.61 | 3.five | three.one | 2.seven | 22 |
seven | GAe11P | two | 1.9 | 1.6 | one.2 | eleven |
8 | GAe15P | two.7 | two.five | 2.3 | 1.nine | 15 |
nine | GAe18P | 3.three | three.one | 2.seven | 2.3 | 18 |
10 | GAe22P | three.eight | 3.7 | three.three | 2.8 | 22 |
eleven | GAe26P | four.three | 4 | three.seven | 3.one | 26 |
twelve | GAe30P | 4.8 | four.five | 4.three | 3.seven | thirty |
thirteen | GA11+P | 2.one | two | one.8 | one.five | eleven |
fourteen | GA15+P | 2.8 | 2.6 | 2.four | 2 | 15 |
15 | GA18+P | 3.5 | three.three | 2.9 | two.5 | eighteen |
16 | GA22+P | four.one | 3.nine | 3.5 | three | 22 |
seventeen | GA26+P | four.eight | four.six | 4.2 | three.six | 26 |
18 | GA30P | five.4 | 5.2 | four.eight | 4.1 | thirty |
19 | GA30+AP | six.1 | six.(8bar) | 4.eight | 3.nine | 30 |
20 | GA37AP | six.four | six.3(8bar) | 5.6 | 4.five | 37 |
21 | GA37+AP | seven.1 | six.9(8bar) | 5.9 | four.nine | 37 |
22 | GA45AP | 7.seven | seven.3(8bar) | 6.five | five.five | 45 |
23 | GA45+AP | 8.six | eight.(8bar) | 7.three | 6.1 | forty five |
24 | GA55AP | ten | nine.3(8bar) | 8.six | 7.4 | fifty five |
25 | GA55+(A/W)P | 10.6 | 10.1(8bar) | 8.7 | ~~~ | fifty five |
26 | GA75AP | thirteen.one | 12.3(8bar) | eleven | 9.seven | 75 |
27 | GA75+(A/W)P | 14.7 | thirteen.8(8bar) | twelve.2 | ten.two | seventy five |
28 | GA90(A/W)P | 16.2 | fifteen.6(8bar) | 14.1 | 12 | ninety |
Table two | ||||||
No | Model | Gas displacement m3/min | Power(kw) | |||
7.5bar | 8.5bar | 10bar | 14bar | |||
one | GA90-(W) | 16.8 | fifteen.8 | fourteen.4 | eleven.1 | 90 |
2 | GA110(W) | twenty | eighteen.8 | seventeen | thirteen.9 | a hundred and ten |
3 | GA132(W) | 24.one | 22.9 | 21 | sixteen.eight | 132 |
4 | GA160(W) | 30.4 | 28.9 | 26.8 | 21.7 | a hundred and sixty |
No | Model | Gas displacement m3/min | Power(kw) | |||
7.5bar | 8.5bar | 10bar | 13bar | |||
5 | GA200(W) | 36.1 | 34 | 30.seven | 26.1 | 200 |
six | GA250(W) | 43.7 | forty one.seven | 37.8 | 31.seven | 250 |
seven | GA315(W) | 55 | fifty two | forty eight | 315 | |
8 | GA355(W) | 60 | fifty seven | 53 | 46 | 355 |
FAQ
one. What is actually Minimal Buy CZPT tity of your CZPT portion?
the MOQ is 1pc, require you shell out for the shipping value.
two. What is actually kind of your packaging for the CZPT portion?
neutral packing or model pack as your need
three. Could I get some samples? How could i pay the sample payment?
sure, we can give sample, but not totally free.
payment: paypal, westunion ,TT
4. How CZPT is your Shipping and delivery CZPT Time ?
If there is inventory, the lead time is about 2 Working Days right after we get the payment, if want to be made, it depens.
5. Could you Determine the shipping and delivery price for me?
Sure, we are honored to do that for you! Just before the freight , please well permit us know which seaport or airport around your location.
6. what is actually the shipping way?
delivery way: air freight, specific, sea